Machining properties of micro EDM using electrostatic induction feeding

被引：0

作者：

Yang, Xiaodong ^{[1
]}

Kimori, Masahito ^{[1
]}

Kunieda, Masanori ^{[1
]}

Sano, Sadao ^{[1
]}

Araie, Ichiro ^{[1
]}

机构：

[1] Harbin Inst Technol, Dept Mech Engn & Automat, Harbin 150001, Peoples R China

来源：

PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING | 2007年

关键词：

micro EDM; electrostatic induction feeding; diode; diameter of craters; capacity coupling;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The purpose of this research is to develop a micro electrical discharge machining method using electrostatic induction feeding. With this method, a pulse generator is coupled with a tool electrode by a capacity in order to reduce the minimum discharge energy per pulse eliminating the influence of the stray capacitance in the circuit. Since both straight polarity discharge and reversed polarity discharge occur alternately, the tool electrode wear is high. Hence, in this study, a diode was connected between the tool electrode and the workpiece in parallel to the working gap to make the discharge unipolar. Theoretical analysis and experimental investigation were conducted on the discharge circuit which was modified to obtain the unipolar discharge.

引用

页码：231 / 234

页数：4

共 50 条

[21] Research on Micro EDM Machine Tool for machining Micro Array Holes [J].

Zhu, Guozheng ;

Bai, Jicheng ;

Guo, Yongfeng ;

Hou, Pengju ;

Li, Chaojiang .

ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 :2401-2404

[22] Research of Layered Machining Experiment by Micro-EDM [J].

Xu, Jinkai ;

Zhang, Linshuai ;

Huang, Fei .

ADVANCES IN MECHATRONICS AND CONTROL ENGINEERING III, 2014, 678 :601-+

[23] Influence of porous structure on the machining performance of micro EDM [J].

Zou, Rimao ;

Yu, Zuyuan ;

Li, Wei ;

Guo, Meigang ;

Li, Jianzhong .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 232 :43-51

[24] A study on the machining of high-aspect ratio micro-structures using micro-EDM [J].

Lim, HS ;

Wong, YS ;

Rahman, M ;

Lee, MKE .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 :318-325

[25] Precision machining of micro tool electrodes in micro EDM for drilling array micro holes [J].

Zhang, Long ;

Tong, Hao ;

Li, Yong .

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2015, 39 :100-106

[26] COMPARATIVE ANALYSIS OF THE PROCESS MECHANICS IN MICRO-ELECTRICAL DISCHARGE MACHINING (EDM) AND REVERSE MICRO-EDM [J].

Mastud, Sachin ;

Singh, Ramesh K. ;

Samuel, Johnson ;

Joshi, Suhas S. .

PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2011, VOL 2, 2011, :349-358

[27] Study of Machining Characteristics of Micro EDM in Nitrogen Plasma Jet [J].

Zou, Rimao ;

Yu, Zuyuan ;

Yan, Chengyang ;

Li, Jianzhong ;

Qian, Jun .

19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, 2018, 68 :559-564

[28] Experimental attempts of sub-micrometer order size machining using micro-EDM [J].

Han, FH ;

Yamada, Y ;

Kawakami, T ;

Kunieda, M .

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2006, 30 (02) :123-131

[29] Micro-EDM-assisted machining micro-holes in printed circuit board [J].

Xu, Bin ;

Feng, Xin-ke ;

Wu, Xiao-yu ;

Luo, Feng ;

Fu, Lian-yu ;

Zhai, Xue-tao ;

Zhao, Yong-hua ;

Zhao, Hang ;

Lei, Jian-guo .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 113 (3-4) :1191-1201

[30] Micro-EDM-assisted machining micro-holes in printed circuit board [J].

Bin Xu ;

Xin-ke Feng ;

Xiao-yu Wu ;

Feng Luo ;

Lian-yu Fu ;

Xue-tao Zhai ;

Yong-hua Zhao ;

Hang Zhao ;

Jian-guo Lei .

The International Journal of Advanced Manufacturing Technology, 2021, 113 :1191-1201

← 1 2 3 4 5 →