A sensitivity analysis of the maximum separation method for the characterisation of solute clusters

Variants of the maximum separation method have become the de-facto methodologies for the characterisation of nanometre scale clusters in atom probe tomography (APT) data obtained from dilute solid solutions. All variants rely on a number of parameters and it is well known that the precise values for these parameters strongly influence estimates of cluster size and number density. Quantitative analyses require an improved understanding of the inter-relationship between user-defined parameters, experimental parameters such as detection efficiency and the resultant parameterisation of the microstructure. A series of simulations has been performed to generate clusters with a range of compositions (50-100%) and diameters (1.5-2.5 nm) in a dilute solid solution. The data were degraded to simulate the effects of the finite detection efficiencies and positioning uncertainties associated with the ECOPoSAP and LEAP-3000X HR. An extensive analysis of each resultant dataset, using a range of values for the maximum separation parameters was then performed. Optimum values for each material condition were identified and it is shown that it is possible to characterise cluster size, number density and matrix chemistry. However, accurate estimates of cluster compositions are more difficult and absolute measurements must be treated with caution. Furthermore, it is shown that D-MAX must increase with decreasing detection efficiency and consequently clusters of a specific size will appear slightly larger in atom probes with a lower detection efficiency. (C) 2010 Elsevier By. All rights reserved.