Influence of persulfate on transformation of phosphorus and heavy metals for improving sewage sludge dewaterability by hydrothermal treatment

Activated persulfate oxidation has been proven to be an efficient advanced sludge treatment technique to improve sludge dewaterability. This study investigates the influence of persulfate on the transformation of phosphorus (P) and heavy metals (HMs) during the hydrothermal treatment of sewage sludge. The hydrothermal temperature, time, and persulfate concentration are optimized by a Box-Behnken design to obtain the best sludge dewaterability, which is expressed by capillary suction time (CST). The highest CST reduction efficiency is 90.5% at the optimal hydrothermal temperature, time, and concentration of persulfate, which are 145 degrees C, 2 h, and 150 mg/g dry sludge (DS), respectively. The distribution and transformation of P and HMs with different persulfate concentrations (100-200 mg/g DS) during the hydrothermal process are investigated. Results show that more than 90% of the P and HMs in the sludge are retained in sludge cakes after the hydrothermal treatment. The addition of SPS can make the P in the sludge cakes transform into more stable P species according to the extraction capacity of sequential extracts. It can be found from the ecological risk indexes of the HMs that the addition of SPS during the hydrothermal treatment of sludge can reduce the environmental risk of HMs. This study provides insights into the P and HM distribution and transformation during hydrothermal treatment with persulfate, providing a reference for sludge recovery strategies.