Investigation on mechanochemical behavior of Al/Mg-B2O3-Nb system reactive mixtures to synthesize niobium diboride

被引：17

作者：

Jafari, Majid ^{[1
]}

Tajizadegan, Hamid ^{[1
]}

Golabgir, Mohammad Hossein ^{[1
]}

Chami, Akbar ^{[1
]}

Torabi, Omid ^{[1
]}

机构：

[1] Islamic Azad Univ, Adv Mat Res Ctr, Dept Mat Engn, Najafabad Branch, Najafabad, Iran

来源：

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2015年 / 50卷

关键词：

Mechanosynthesis; NbB2; Magnesiothermic reaction; Aluminothermic reaction; COMBUSTION SYNTHESIS; MA-SHS; NANOCOMPOSITE POWDER; NBB2; AIR; REDUCTION; NBC;

D O I：

10.1016/j.ijrmhm.2014.10.017

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Aluminum and magnesium were used in the M-B2O3-Nb (M = Al, Mg) system to synthesize niobium diboride (NbB2) via a mechanochemical process. The phase transformation and structural evaluation were investigated by means of X-ray diffractometry, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and differential thermal analysis techniques (DTA). Unlike thermodynamic possibility and DTA results, negligible aluminothermic reaction was occurred in the system and AINb(2) intermediate phase was formed during milling. On the other hand, nanostructure NbB2 was mechanosynthesized by the magnesiothermic reduction after 2.4 h of milling and the type of reactions was mechanically induced self-sustaining reaction (MSR). DTA results revealed that Mg-3(BO3)(2) was largely formed during the thermal process, while the quantity of this by-product extremely decreased during the mechanochemical synthesis and completely eliminated after 5 h of milling. Scanning and transmission electron microscopy observations confirmed that the range of particle size was within 100 nm. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：86 / 92

页数：7

共 23 条

[1] Balaz P, 2008, MECHANOCHEMISTRY NAN, DOI DOI 10.1007/978-3-540-74855-7_1
[2] FROES FH, 1995, MAT SCI ENG A-STRUCT, V192, P612, DOI 10.1016/0921-5093(94)03285-8
[3] GALVANOMAGNETIC INVESTIGATION OF TIB2, NBB2 AND ZRB2
GORDON, W
SOFFER, SB
[J]. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 1975, 36 (7-8) : 627 - 631
[4] Mechanochemically assisted preparation of NbB2 powder
Iizumi, K
Sekiya, C
Okada, S
Kudou, K
Shishido, T
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2006, 26 (4-5) : 635 - 638
[5] Mechanochemical synthesis of ZrB2-SiC-ZrC nanocomposite powder by metallothermic reduction of zircon
Jalaly, M.
Tamizifar, M.
Bafghi, M. Sh.
Gotor, F. J.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 581 : 782 - 787
[6] Mechanosynthesis of nanocrystalline ZrB2-based powders by mechanically induced self-sustaining reaction method
Jalaly, M.
Bafghi, M. Sh.
Tamizifar, M.
Gotor, F. J.
[J]. ADVANCES IN APPLIED CERAMICS, 2013, 112 (07) : 383 - 388
[7] Mechanochemical synthesis of Al2O3-TiB2 nanocomposite powder from Al-TiO2-H3BO3 mixture
Khaghani-Dehaghani, M. A.
Ebrahimi-Kahrizsangi, R.
Setoudeh, N.
Nasiri-Tabrizi, B.
[J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2011, 29 (02) : 244 - 249
[8] SYNTHESIS OF NIOBIUM BORIDE POWDER BY SOLID-STATE REACTION BETWEEN NIOBIUM AND AMORPHOUS BORON
MATSUDAIRA, T
ITOH, H
NAKA, S
HAMAMOTO, H
[J]. JOURNAL OF THE LESS-COMMON METALS, 1989, 155 (02): : 207 - 214
[9] DEFECT STRUCTURES OF VB2 AND NBB2 SINGLE-CRYSTALS
NAKANO, K
DOI, M
KUWAYAMA, K
IMURA, T
[J]. JOURNAL OF THE LESS-COMMON METALS, 1981, 82 (1-2): : 309 - 316
[10] Self-propagating combustion synthesis via an MSR process: An efficient and simple method to prepare (Ti, Zr, Hf)B2-Al2O3 powder nanocomposites
Sayagues, M. J.
Aviles, M. A.
Cordoba, J. M.
Gotor, F. J.
[J]. POWDER TECHNOLOGY, 2014, 256 : 244 - 250

← 1 2 3 →