Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment

被引：8

作者：

Bagishev, A. S. ^{[1
]}

Mal'bakhova, I. M. ^{[1
]}

Vorob'ev, A. M. ^{[1
]}

Borisenko, T. A. ^{[1
]}

Asmed'yanova, A. D. ^{[1
,2
]}

Titkov, A., I ^{[1
]}

Nemudryi, A. P. ^{[1
]}

机构：

[1] Russian Acad Sci, Inst Solid State Chem & Mechanochem, Siberian Branch, Novosibirsk, Russia

[2] Novosibirsk State Univ, Novosibirsk, Russia

来源：

RUSSIAN JOURNAL OF ELECTROCHEMISTRY | 2022年 / 58卷 / 07期

关键词：

fuel cells; hydrogen; 3D printing; additive manufacturing technologies; ELECTROLYTE;

D O I：

10.1134/S1023193522070047

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

A composition of the paste used in printing SOFC anodes is developed on the basis of nanosized nickel oxide and gadolinia-stabilized ceria with the aim of 3D inkjet printing followed by laser and thermal sintering. The parameters of the anode paste such as the size distribution of particles and the viscosity are determined. A SOFC anode sample is printed by means of a laboratory 3D printer equipped with a metering system for inkjet printing and also by a module for laser treatment. Experiments are carried out on printing three-dimensional test objects with the use of the developed ceramic paste. These samples are studied by a complex of physicochemical methods for determination of morphological and structural characteristics.

引用

页码：600 / 605

页数：6

共 11 条

[1] Anode- versus electrolyte-supported Ni-YSZ/YSZ/Pt SOFCs: Effect of cell design on OCV, performance and carbon formation for the direct utilization of dry methane [J].

Buccheri, Marco A. ;

Singh, Anand ;

Hill, Josephine M. .

JOURNAL OF POWER SOURCES, 2011, 196 (03) :968-976

[2] Dense ceramics with complex shape fabricated by 3D printing: A review [J].

Chen, Zhe ;

Sun, Xiaohong ;

Shang, Yunpeng ;

Xiong, Kunzhou ;

Xu, Zhongkai ;

Guo, Ruisong ;

Cai, Shu ;

Zheng, Chunming .

JOURNAL OF ADVANCED CERAMICS, 2021, 10 (02) :195-218

[3] Additive Manufacture of Ceramics Components by Inkjet Printing [J].

Derby, Brian .

ENGINEERING, 2015, 1 (01) :113-123

[4] 3D-Printed Hermetic Alumina Housings [J].

Eickenscheidt, Max ;

Langenmair, Michael ;

Dbouk, Ahmad ;

Noetzel, Dorit ;

Hanemann, Thomas ;

Stieglitz, Thomas .

MATERIALS, 2021, 14 (01) :1-13

[5] 3D printing of extremely viscous materials using ultrasonic vibrations [J].

Gunduz, I. E. ;

McClain, M. S. ;

Cattani, P. ;

Chiu, G. T-C ;

Rhoads, J. F. ;

Son, S. F. .

ADDITIVE MANUFACTURING, 2018, 22 :98-103

[6]

Lomberg M., 2015, ECS Transactions, V68, P2119, DOI 10.1149/06801.2119ecst

[7] Direct ink writing (DIW) of structural and functional ceramics: Recent achievements and future challenges [J].

Shahzad, Aamir ;

Lazoglu, Ismail .

COMPOSITES PART B-ENGINEERING, 2021, 225

[8] A Study of Anode-Supported Solid Oxide Fuel Cell Modeling and Optimization Using Neural Network and Multi-Armed Bandit Algorithm [J].

Song, Changhee ;

Lee, Sanghoon ;

Gu, Bonhyun ;

Chang, Ikwhang ;

Cho, Gu Young ;

Baek, Jong Dae ;

Cha, Suk Won .

ENERGIES, 2020, 13 (07)

[9] Appraisal of Ce1-yGdyO2-y/2 electrolytes for IT-SOFC operation at 500°C [J].

Steele, BCH .

SOLID STATE IONICS, 2000, 129 (1-4) :95-110

[10] Accelerating Fuel Cell Development with Additive Manufacturing Technologies: State of the Art, Opportunities and Challenges [J].

Tai, X. Y. ;

Zhakeyev, A. ;

Wang, H. ;

Jiao, K. ;

Zhang, H. ;

Xuan, J. .

FUEL CELLS, 2019, 19 (06) :636-650

← 1 2 →