Wear performance of the WC/Cu self-lubricating textured coating

被引:31
作者
Mi, Pengbo [1 ,2 ]
Ye, Fuxing [1 ,3 ]
机构
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin 300350, Peoples R China
[2] Tianjin Univ, Tianjin Key Lab Adv Joining Technol, Tianjin 300072, Peoples R China
[3] Tianjin Univ, Minist Educ, Key Lab Adv Ceram & Machining Technol, Tianjin 300072, Peoples R China
基金
中国国家自然科学基金;
关键词
High-velocity oxygen-fuel (HVOF); WC/Cu; Textured coating; Wear performance; WC-CO COATINGS; TRIBOLOGICAL PROPERTIES; SURFACE; RESISTANCE; IMPROVEMENT; COMPOSITE; PROPERTY; ALLOY;
D O I
10.1016/j.vacuum.2018.08.029
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The WC/Cu textured coating was prepared using high-velocity oxygen-fuel (HVOF). The structure and wear performance of the textured coating were investigated. The results show that the soft Cu fills the gap of the hard WC islands. The WC/Cu textured coating exhibits lower friction coefficient and wear rate than that of the traditional WC coating. The wear debris can form lubricant film on the surface of Cu phase. The Cu phase can form self-lubricating film on the WC islands. The formation of the friction film on the wear surface can decreases the friction coefficient and improves the wear resistance.
引用
收藏
页码:17 / 20
页数:4
相关论文
共 16 条
[1]   Magnetron sputter deposition of WC-Ag and TiC-Ag coatings and their frictional properties in vacuum environments [J].
Endrino, JL ;
Nainaparampil, JJ ;
Krzanowski, JE .
SCRIPTA MATERIALIA, 2002, 47 (09) :613-618
[2]   Microstructure-property relations in WC-Co coatings sprayed from combinatorial Ni-plated and nanostructured powders [J].
Han, J. -C. ;
Jafari, M. ;
Park, C. -G. ;
Seol, Jae-Bok .
MATERIALS CHARACTERIZATION, 2017, 129 :207-216
[3]   Tribological Properties of Lubricating Films on the Al-Si Alloy Surface via Laser Surface Texturing [J].
Hu, Tianchang ;
Hu, Litian .
TRIBOLOGY TRANSACTIONS, 2011, 54 (05) :800-805
[4]   Effects of solid lubricant and laser surface texturing on tribological behaviors of atmospheric plasma sprayed Al2O3-ZrO2 composite coatings [J].
Kim, Seung-Ho ;
Jeong, Sang-Hoon ;
Kim, Tae-Ho ;
Choi, Jin-Hyuk ;
Cho, Sung-Hun ;
Kim, Bum Sung ;
Lee, Soo Wohn .
CERAMICS INTERNATIONAL, 2017, 43 (12) :9200-9206
[5]   Effect of surface laser texture on friction properties of nickel-based composite [J].
Li, Jianliang ;
Xiong, Dangsheng ;
Dai, Jihui ;
Huang, Zhongjia ;
Tyagi, Rajnesh .
TRIBOLOGY INTERNATIONAL, 2010, 43 (5-6) :1193-1199
[6]   Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure [J].
Ma, Ning ;
Guo, Lei ;
Cheng, Zhenxiong ;
Wu, Huantao ;
Ye, Fuxing ;
Zhang, Keke .
APPLIED SURFACE SCIENCE, 2014, 320 :364-371
[7]   Effects of laser surface texturing on the wear and failure mechanism of grey cast iron reciprocating against steel under starved lubrication conditions [J].
Saeidi, F. ;
Parlinska-Wojtan, M. ;
Hoffmann, P. ;
Wasmer, K. .
WEAR, 2017, 386-387 :29-38
[8]   Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface [J].
Segu, Dawit Zenebe ;
Kim, Jong-Hyoung ;
Choi, Si Geun ;
Jung, Yong-Sub ;
Kim, Seock-Sam .
SURFACE & COATINGS TECHNOLOGY, 2013, 232 :504-514
[9]   Corrosion and strength degradation behaviors of binderless WC material and WC-Co hardmetal in alkaline solution: A comparative investigation [J].
Tang, Wei ;
Zhang, Li ;
Chen, Yi ;
Zhang, Huadong ;
Zhou, Lei .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2017, 68 :1-8
[10]   Laser surface texturing for adaptive solid lubrication [J].
Voevodin, A. A. ;
Zabinski, J. S. .
WEAR, 2006, 261 (11-12) :1285-1292