Effect of Blending Modifications for Phenylethynyl-terminated Polyimides

A reactive diluent (ODA-PEPA) and a flexible phenylethynyl-terminated imide oligomer (PEI-PEPA) were designed and synthesized based on the 2,3,3',4'-diphenyl ether tetracarboxylic acid dianhydride (a-ODPA), 3,4'-oxydianiline (3,4'-ODA), and 4-phenylethynylphthalic anhydride (PEPA). Solution blended systems with the addition of 5, 10, and 15 wt% ODA-PEPA to PEI-PEPA oligomer and their cured resin systems were prepared. Results showed that ODA-PEPA is semi-crystalline in nature. The T-g values of cured resins were improved from 273 degrees C to 280 degrees C by the addition of ODA-PEPA, due to the higher crosslink densities. In addition, rheological properties of blends showed lower melt viscosity and wider processing window, revealing improved melt processabilities for potential application in making advanced composites. The isothermal viscosity in 280 degrees C of PEI-PEPA containing 15 wt% ODA-PEPA reactive diluent decreased by two thirds, due to the low molecular weight of ODA-PEPA. The cured blends demonstrated high thermal stability and heat resistance. 5 wt% thermal decomposition temperatures (T-d5) of the cured blends were above 549 degrees C and 547 degrees C in N2 and air atmosphere, respectively. The char yield reported at 800 degrees C in N-2 atmosphere increased from 58.8% to 63.7 % with the addition of ODAPEPA. Meanwhile, the cured polyimides blends possessed good bond strength (> 9.3 MPa).