Developments in the field of conducting and non-conducting polymer based potentiometric membrane sensors for ions over the past decade

被引:134
作者
Faridbod, Farnoush [1 ]
Ganjali, Mohammad Reza [1 ]
Dinarvand, Rassoul [2 ]
Norouzi, Parviz [1 ]
机构
[1] Univ Tehran, Fac Chem, Ctr Excellence Electrochem, Tehran, Iran
[2] Univ Tehran, Med Nanotechnol Res Ctr, Tehran, Iran
关键词
conducting polymer; sensor; ion selective electrodes; non-conducting polymer; potentiometric membrane sensor;
D O I
10.3390/s8042331
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
Many research studies have been conducted on the use of conjugated polymers in the construction of chemical sensors including potentiometric, conductometric and amperometric sensors or biosensors over the last decade. The induction of conductivity on conjugated polymers by treating them with suitable oxidizing agents won Heeger, MacDiarmid and Shirakawa the 2000 Nobel Prize in Chemistry. Common conjugated polymers are poly( acetylene)s, poly( pyrrole)s, poly( thiophene)s, poly( terthiophene)s, poly( aniline)s, poly( fluorine)s, poly( 3-alkylthiophene)s, polytetrathiafulvalenes, polynapthalenes, poly( p-phenylene sulfide), poly( p-phenylenevinylene)s, poly( 3,4-ethylenedioxythiophene), polyparaphenylene, polyazulene, polyparaphenylene sulfide, polycarbazole and polydiaminonaphthalene. More than 60 sensors for inorganic cations and anions with different characteristics based on conducting polymers have been reported. There have also been reports on the application of non-conducting polymers ( nCPs), i.e. PVC, in the construction of potentiometric membrane sensors for determination of more than 60 inorganic cations and anions. However, the leakage of ionophores from the membranes based on these polymers leads to relatively lower life times. In this article, we try to give an overview of Solid-Contact ISE ( SCISE), Single-Piece ISE ( SPISE), Conducting Polymer ( CP)-Based, and also non-conducting polymer PVC-based ISEs for various ions which their difference is in the way of the polymer used with selective membrane. In SCISEs and SPISEs, the plasticized PVC containing the ionophore and ionic additives govern the selectivity behavior of the electrode and the conducting polymer is responsible of ion-to-electron transducer. However, in CPISEs, the conducting polymer layer is doped with a suitable ionophore which enhances the ion selectivity of the CP while its redox response has to be suppressed.
引用
收藏
页码:2331 / 2412
页数:82
相关论文
共 628 条
[1]   pH sensitivity of a porphyrin film electrode [J].
Abakumova, RA ;
Valiotti, AB ;
Vasil'eva, OE ;
Kopylova, EA ;
Shumilova, GI ;
Mikhel'son, KN .
RUSSIAN JOURNAL OF GENERAL CHEMISTRY, 2003, 73 (02) :300-307
[2]   Novel solid-state cadmium ion-selective electrodes based on its tetraiodo- and tetrabromo-ion pairs with cetylpyridinium [J].
Abbas, MN ;
Zahran, E .
JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 2005, 576 (02) :205-213
[3]  
Abbas MN, 2002, ANAL LETT, V35, P813
[4]   Aluminium(III)-selective electrode based on a newly synthesized tetradentate Schiff base [J].
Abbaspour, A ;
Esmaeilbeig, AR ;
Jarrahpour, AA ;
Khajeh, B ;
Kia, R .
TALANTA, 2002, 58 (02) :397-403
[5]   Chromium(III) ion-selective electrode based on 4-dimethylaminoazobenzene [J].
Abbaspour, A ;
Izadyar, A .
TALANTA, 2001, 53 (05) :1009-1013
[6]   Carbon nanotube composite coated platinum electrode for detection of Cr(III) in real samples [J].
Abbaspour, Abdolkarim ;
Izadyar, Anahita .
TALANTA, 2007, 71 (02) :887-892
[7]   A novel potentiometric solid-state iodide sensor [J].
Abdel-Latif, Monzir S. ;
Al-Saraj, Manal R. .
ANALYTICAL LETTERS, 2007, 40 (04) :729-736
[8]  
Abdulla NI, 2005, TURK J CHEM, V29, P687
[9]   Tin(II)-selective membrane potentiometric sensor using a crown ether as neutral carrier [J].
Aghaie, H ;
Giahi, A ;
Monajjemi, M ;
Arvand, A ;
Nafissi, GH ;
Aghaie, M .
SENSORS AND ACTUATORS B-CHEMICAL, 2005, 107 (02) :756-761
[10]  
Akhond M, 2005, B KOREAN CHEM SOC, V26, P882