Formation of tricalcium silicate prepared by electric and microwave sintering

被引：4
作者：
Ke, Kai [1 ]
Ma, Baoguo [1 ]
Wang, Xiaoliang [1 ]
Li, Xiangguo
机构：
[1] Wuhan Univ Technol, Key Lab Silicate Mat Sci & Engn, Minist Educ, Wuhan 430070, Hubei Province, Peoples R China
来源：
MANUFACTURING PROCESSES AND SYSTEMS, PTS 1-2 | 2011年 / 148-149卷
关键词：
C3S; microwave sintering; phase diagram; solid solution; CA3SIO5;
D O I：
10.4028/www.scientific.net/AMR.148-149.1119
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A microwave sintering method was used to prepare C3S from Ca(OH)(2), SiO2 and MexOy. f-CaO assay, X-ray diffraction and SEM were used to characterize the sintered samples. The results indicated that ion oxides played a very important role in C3S formation in conventional sintering, the use of MexOy as an additive was so effective in promoting C3S formation. The experimental results showed that samples were heated at an electric heating temperature(1500 degrees C) and then further sintered with microwave for 30 similar to 60 min, tricalcium silicate could be formed with kilogram step. The new burning technique can greatly increase the forming speed of tricalcium silicate, MnO2, CuO and Ni2O3 could enhance the microwave sintering.
引用
收藏
页码：1119 / +
页数：2
相关论文
共 50 条
  • [21] Microstructure and mechanical properties of NbC-Ni cermets prepared by microwave sintering
    Tang, Siwen
    Zhang, Hao
    Yang, Zhifu
    Liu, Qian
    Lv, Zheng
    Ouyang, Cong
    Qiu, Xinyi
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2022, 41 (01) : 482 - 492
  • [22] Microstructural and microwave dielectric properties of ZnNb2O6 ceramics prepared through microwave sintering
    Shahgholi, Nafiseh
    Asadian, Keivan
    Ebadzadeh, Touradj
    CERAMICS INTERNATIONAL, 2014, 40 (09) : 14335 - 14339
  • [23] Characterization of biomedical hydroxyapatite/magnesium composites prepared by powder metallurgy assisted with microwave sintering
    Xiong, Guangyao
    Nie, Yanjiao
    Ji, Dehui
    Li, Jing
    Li, Chunzhi
    Li, Wei
    Zhu, Yong
    Luo, Honglin
    Wan, Yizao
    CURRENT APPLIED PHYSICS, 2016, 16 (08) : 830 - 836
  • [24] Microstructure, mechanical properties and superelasticity of biomedical porous NiTi alloy prepared by microwave sintering
    Xu, J. L.
    Bao, L. Z.
    Liu, A. H.
    Jin, X. J.
    Tong, Y. X.
    Luo, J. M.
    Zhong, Z. C.
    Zheng, Y. F.
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2015, 46 : 387 - 393
  • [25] Microstructure and mechanical properties of Al/(Ti,W)C composites prepared by microwave sintering
    Zheng, R. R.
    Wu, Y.
    Liao, S. L.
    Wang, W. Y.
    Wang, W. B.
    Wang, A. H.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 590 : 168 - 175
  • [26] Mechanical and biological properties of bioglass/magnesium composites prepared via microwave sintering route
    Wan, Yizao
    Cui, Teng
    Li, Wei
    Li, Chunzhi
    Xiao, Jian
    Zhu, Yong
    Ji, Dehui
    Xiong, Guangyao
    Luo, Honglin
    MATERIALS & DESIGN, 2016, 99 : 521 - 527
  • [27] Structure, mechanical and bioactive properties of nanostructured hydroxyapatite/titania composites prepared by microwave sintering
    Yao, Hai-Long
    Yang, Chao
    Yang, Qu
    Hu, Xiao-Zhen
    Zhang, Meng-Xian
    Bai, Xiao-Bo
    Wang, Hong-Tao
    Chen, Qing-Yu
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 241 (241)
  • [28] Study on a Novel Biodegradable and Antibacterial Fe-Based Alloy Prepared by Microwave Sintering
    Deng, Bin
    Guo, Yingxue
    Zhao, Ming-Chun
    Li, Qing-Fen
    Ma, Bin
    Duan, Bohua
    Yin, Dengfeng
    Atrens, Andrej
    MATERIALS, 2021, 14 (14)
  • [29] Partially biodegradable Ti-Mg composites prepared by microwave sintering for biomedical application
    Lai, T.
    Xu, J. L.
    Huang, J.
    Wang, Q.
    Zhang, J. P.
    Luo, J. M.
    MATERIALS CHARACTERIZATION, 2022, 185
  • [30] Higher d.c. resistivity of Li-Zn-Cd ferrites prepared by microwave sintering compared with conventional sintering
    Mamata Maisnam
    Sumitra Phanjoubam
    Bulletin of Materials Science, 2014, 37 : 1227 - 1232
12345