Fault-tolerant Control of a 15-phase Induction Machine with Non-sinusoidal Supply under Open-circuited Fault Conditions

被引：0
|
作者：
Zheng, Xiaoqin [1 ]
Wu, Xinzhen [1 ]
Yi, Xinqiang [2 ]
Liu, Haitao [2 ]
Ni, Ronggang [1 ]
机构：
[1] Qingdao Univ, Coll Elect Engn, Qingdao, Peoples R China
[2] NUE, Inst Power Elect Technol, Wuhan, Peoples R China
来源：
2019 22ND INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2019) | 2019年
基金：
中国博士后科学基金;
关键词：
multiphase induction machines; non-sinusoidal supply; fault-tolerant control; DESIGN;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The superior fault-tolerant capability is one of the most significant advantages of multiphase induction machines. In this paper, post-fault currents are optimized for a 15-phase induction machine supplied by non-sinusoidal voltage with third-order harmonic injection. To obtain the maximum smooth torque matched the propeller load, a fault-tolerant control scheme is proposed through analyzing the couple effect between fundamental and third-order harmonic rotating MMFs. The proposed control uses the pre-fault decoupling transformation matrix, thus the change of the controller is minimized. Different open-circuited faults experiments of a 45-kW prototype 15-phase induction machine verifies the validity of the proposed fault-tolerant control.
引用
收藏
页码：618 / 621
页数：4
相关论文
共 50 条
  • [31] Six-Phase Induction Machine Drive Model for Fault-Tolerant Operation
    Aroquiadassou, G.
    Mpanda-Mabwe, A.
    Betin, F.
    Capolino, G. -A.
    2009 IEEE INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRIC MACHINES, POWER ELECTRONICS AND DRIVES, 2009, : 137 - +
  • [32] Single Open-phase Fault Detection with Fault-Tolerant Control of an Inverter-fed Permanent Magnet Synchronous Machine
    Kontarcek, Andraz
    Nemec, Mitja
    Bajec, Primoz
    Ambrozic, Vanja
    AUTOMATIKA, 2014, 55 (04) : 474 - 486
  • [33] Fault-Tolerant Control of 3-Phase IM Drive (Speed-Sensor Fault and Open-Phase Fault)
    Jannati, M.
    Monadi, A.
    Idris, N. R. N.
    2015 IEEE CONFERENCE ON ENERGY CONVERSION (CENCON), 2015, : 384 - 389
  • [34] A simple fault-tolerant control method for open-phase three-phase induction motor drives
    Saffar, Esmaeil
    Ghanbari, Mahmood
    Ebrahimi, Reza
    Jannati, Mohammad
    CONTROL ENGINEERING PRACTICE, 2023, 136
  • [35] Fault-Tolerant SVPWM Control Strategy for Five-Phase PMSM under Single-Phase Open-Circuit Fault
    Chen Yiguang
    Bao Zhenmao
    Lin Chenghan
    Zhao Xiaobin
    INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS, 2019, 158 : 2605 - 2610
  • [36] Sliding Mode-Based Active Fault-Tolerant Control for Induction Machine
    Amal Guezmil
    Hanen Berriri
    Anis Sakly
    Mohamed Faouzi Mimouni
    Arabian Journal for Science and Engineering, 2020, 45 : 1447 - 1455
  • [37] Sliding Mode-Based Active Fault-Tolerant Control for Induction Machine
    Guezmil, Amal
    Berriri, Hanen
    Sakly, Anis
    Mimouni, Mohamed Faouzi
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (03) : 1447 - 1455
  • [38] Fault-tolerant Field Oriented Control for Five-phase Permanent-magnet Motors Under Single Phase Open Fault
    Xiong C.
    Xu H.
    Zhou P.
    Guan T.
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2019, 39 (23): : 7055 - 7064
  • [39] Robust Fault-Tolerant Control of a Five-Phase Permanent Magnet Synchronous Motor under an Open-Circuit Fault
    Zeghlache, Ayyoub
    Mekki, Hemza
    Benkhoris, Mohamed Fouad
    Djerioui, Ali
    Ziane, Djamel
    Zeghlache, Samir
    APPLIED SCIENCES-BASEL, 2024, 14 (12):
  • [40] A Half-bridge Strategy Based Fault-tolerant Control for BLDCM under Open Circuit Fault
    Wang, Shuai
    Zhang, Xinhua
    Xiong, Guansong
    Wang, Jun
    Zhang, Zijun
    Wang, Xingjian
    PROCEEDINGS OF THE 15TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA 2020), 2020, : 1750 - 1755
12345