Cr/SmCo/Cu/Cr thin films with high coercivity deposited at low pressure

The Cr/SmCo/Cu/Cr multi-layer thin films with high coercivity were prepared under low deposition pressure by using the magnetron sputtering. The as-deposited SmCo films show the amorphous structure while Sm2Co17 or SmCo5 hard magnetic phases appear upon annealing in vacuum furnace at temperature between 500 and 600 degrees C. It is also found that the SmCo phase transformation takes place from SmCo5 to Sm2Co17 with elevating deposition pressure from 2 to 5 m Torr. The post-annealing temperature has a great effect on the phase transition and the decomposition of the SmCo phase. It is found that the magnetic properties of the films including coercivity are dependent both on the deposition pressure and the annealing temperature. In-plane coercivity value of as high as 38 kOe was obtained for the SmCo film deposited at 2 m Torr pressure when annealed at 550 degrees C, while the coercivity drops down to 15 kOe when the annealing temperature of 600 degrees C was used because of the decomposition of SmCo phase. The results suggest that single phase SmCo thin films with high coercivity can be effectively produced by simply adjusting the synthesis parameters in magnetron sputtering system. (C) 2016 Elsevier B.V. All rights reserved.