Soft particles assisted grain refinement and strengthening of an Al-Bi-Zn alloy subjected to ECAP

被引：13

作者：

Jia, Hailong ^{[1
]}

Bjorge, Ruben ^{[2
]}

Marthinsen, Knut ^{[1
]}

Mathiesen, Ragnvald H. ^{[3
]}

Li, Yanjun ^{[1
]}

机构：

[1] Norwegian Univ Sci & Technol NTNU, Dept Mat Sci & Engn, N-7491 Trondheim, Norway

[2] SINTEF, Mat & Chem, N-7465 Trondheim, Norway

[3] Norwegian Univ Sci & Technol, Dept Phys, N-7491 Trondheim, Norway

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2017年 / 703卷

关键词：

Aluminium alloy; ECAP; Soft particle; Precipitation; Tensile properties; TRANSIENT DIRECTIONAL SOLIDIFICATION; WORK-HARDENING BEHAVIOR; MICROSTRUCTURAL EVOLUTION; IMMISCIBLE ALLOYS; DUCTILITY; MATRIX; COMPOSITES; DEFORMATION; FRACTURE;

D O I：

10.1016/j.msea.2017.07.064

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

With the aim to improve the strength of potential Pb-free Al-Bi based bearing alloys, an Al-6Bi-8Zn alloy was subjected to equal channel angular pressing (ECAP). To reveal the roles played by the soft Bi particles, an Al-8Zn alloy is compared. After five passes of ECAP (5P), ultrafine grained (UFG) microstructures are obtained in both alloys, while most of the Bi particles are deformed into the flake shapes. The yield strength (YS) of the as deformed Al-6Bi-8Zn sample is more than three times as that of the as-cast sample. The influence of soft Bi particles on the deformation during ECAP and the final mechanical properties of the Al-6Bi-8Zn alloy are discussed. It is revealed that soft Bi particles have a strong influence on enhancing grain refinement during ECAP. At the same time, ECAP is found to accelerate the precipitation of the beta(Zn) phase along grain boundaries (GBs).

引用

页码：304 / 313

页数：10

共 30 条

[1] Effect of processing route and second phase particles on grain refinement during equal-channel angular extrusion [J].

Berta, M ;

Apps, PJ ;

Prangnell, PB .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 410 :381-385

[2] Microhardness measurements and the Hall-Petch relationship in an Al-Mg alloy with submicrometer grain size [J].

Furukawa, M ;

Horita, Z ;

Nemoto, M ;

Valiev, RZ ;

Langdon, TG .

ACTA MATERIALIA, 1996, 44 (11) :4619-4629

[3]

Hai Long Jia, 2017, Materials Science Forum, V879, P843, DOI 10.4028/www.scientific.net/MSF.879.843

[4] Solute-enhanced tensile ductility of ultrafine-grained Al-Zn alloy fabricated by friction stir processing [J].

Hu, C. M. ;

Lai, C. M. ;

Kao, P. W. ;

Ho, N. J. ;

Huang, J. C. .

SCRIPTA MATERIALIA, 2009, 60 (08) :639-642

[5] Grain boundary structure of nanocrystalline Cu processed by cryomilling [J].

Huang, JY ;

Liao, XZ ;

Zhu, YT ;

Zhou, F ;

Lavernia, EJ .

PHILOSOPHICAL MAGAZINE, 2003, 83 (12) :1407-1419

[6] The formation of nanograin structures and accelerated room-temperature theta precipitation in a severely deformed Al-4 wt.% Cu alloy [J].

Huang, Y. ;

Robson, J. D. ;

Prangnell, P. B. .

ACTA MATERIALIA, 2010, 58 (05) :1643-1657

[7] The deformation and work hardening behaviour of a SPD processed Al-5Cu alloy [J].

Jia, Hailong ;

Bjorge, Ruben ;

Marthinsen, Knut ;

Li, Yanjun .

JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 697 :239-248

[8] Sliding behavior of selected aluminum alloys [J].

Lepper, K ;

James, M ;

Chashechkina, J ;

Rigney, DA .

WEAR, 1997, 203 :46-56

[9] EFFECTS OF MATRIX MICROSTRUCTURE AND PARTICLE DISTRIBUTION ON FRACTURE OF AN ALUMINUM METAL MATRIX COMPOSITE [J].

LEWANDOWSKI, JJ ;

LIU, C ;

HUNT, WH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1989, 107 :241-255

[10] The dissolution behavior of θ′ phase in Al-Cu binary alloy during equal channel angular pressing and multi-axial compression [J].

Liu, Zhiyi ;

Chen, Xu ;

Han, Xiangnan ;

Gu, Yanxia .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (16-17) :4300-4305

← 1 2 3 →