Effect of milling on morphological and microstructural properties of powder particles for High-Cr Oxide dispersion strengthened ferritic steels

被引：14
作者：
Iwata, Noriyuki Y. [1 ]
Kimura, Akihiko
Fujiwara, Masayuki
Kawashima, Norimichi
机构：
[1] Kyoto Univ, Inst Adv Energy, Kyoto 6110011, Japan
[2] Kobelco Res Inst Inc, Kobe, Hyogo 6512271, Japan
[3] Toin Univ Yokohoma, Aoba Ku, Yokohama, Kanagawa 2258502, Japan
来源：
JOURNAL OF NUCLEAR MATERIALS | 2007年 / 367卷 / SPEC. ISS.期
关键词：
D O I：
10.1016/j.jnucmat.2007.03.147
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The morphological and microstructural properties of powder particles were examined systematically to optimize the milling time for producing high-chromium oxide dispersion strengthened (ODS) ferritic steels. The XRD and SEM results showed that peak broadening in the XRD patterns occurred due to a decrease in the grain size and the particle diameter of the powder during mechanical milling. The particle size distribution range decreased first with increasing the milling time up to 12 h and then clearly increased thereafter. After 12 h milling, the particles were nearly spherical with nearly uniform mean size of 5.9 mu m. SEM-EDS analysis of the particle surface showed all distributed homogeneously. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：191 / 195
页数：5
相关论文
共 50 条
[21]   Development of 9Cr ferritic-martensitic and 18Cr ferritic oxide dispersion strengthened steels [J].
Sundararajan, G. ;
Vijay, R. ;
Reddy, A. V. .
CURRENT SCIENCE, 2013, 105 (08) :1100-1106
[22]   Polymorphic and coherency transition of Y-Al complex oxide particles with extrusion temperature in an Al-alloyed high-Cr oxide dispersion strengthened ferritic steel [J].
Dou, P. ;
Kimura, A. ;
Okuda, T. ;
Inoue, M. ;
Ukai, S. ;
Ohnuki, S. ;
Fujisawa, T. ;
Abe, F. .
ACTA MATERIALIA, 2011, 59 (03) :992-1002
[23]   Influence of microstructural parameters on the mechanical properties of oxide dispersion strengthened Fe-14Cr steels [J].
Dade, M. ;
Malaplate, J. ;
Gamier, J. ;
De Geuser, F. ;
Barcelo, F. ;
Wident, P. ;
Deschamps, A. .
ACTA MATERIALIA, 2017, 127 :165-177
[24]   Microstructure and Charpy impact properties of 12-14Cr oxide dispersion-strengthened ferritic steels [J].
Oksiuta, Z. ;
Baluc, N. .
JOURNAL OF NUCLEAR MATERIALS, 2008, 374 (1-2) :178-184
[25]   Effect of Co on creep deformation and precipitation behavior of high-Cr ferritic steels [J].
Kadoya, Y ;
Shimizu, E .
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2002, 88 (09) :539-546
[26]   Effect of Cr/Al contents on the 475°C age-hardening in oxide dispersion strengthened ferritic steels [J].
Han, Wentuo ;
Yabuuchi, Kiyohiro ;
Kimura, Akihiko ;
Ukai, Shigeharu ;
Oono, Naoko ;
Kaito, Takeji ;
Torimaru, Tadahiko ;
Hayashi, Shigenari .
NUCLEAR MATERIALS AND ENERGY, 2016, 9 :610-615
[27]   TEM and HRTEM study of oxide particles in an Al-alloyed high-Cr oxide dispersion strengthened steel with Zr addition [J].
Dou, Peng ;
Kimura, Akihiko ;
Kasada, Ryuta ;
Okuda, Takanari ;
Inoue, Masaki ;
Ukai, Shigeharu ;
Ohnuki, Somei ;
Fujisawa, Toshiharu ;
Abe, Fujio .
JOURNAL OF NUCLEAR MATERIALS, 2014, 444 (1-3) :441-453
[28]   EFFECT OF POWDER PREPARATION PARAMETERS ON OXIDE DISPERSION STRENGTHENING OF FERRITIC STEELS [J].
DEWILDE, L ;
MASSAUX, H ;
NOELS, J .
POWDER TECHNOLOGY, 1971, 4 (04) :173-&
[29]   Nano oxide particles in 18Cr oxide dispersion strengthened (ODS) steels with high yttria contents [J].
Singh, Ratnakar ;
Prakash, Ujjwal ;
Kumar, Deepak ;
Laha, Kinkar .
MATERIALS CHARACTERIZATION, 2022, 189
[30]   Microstructural evolution of oxide-dispersion-strengthened Fe–Cr model steels during mechanical milling and subsequent hot pressing [J].
Lei Dai ;
Yongchang Liu ;
Zongqing Ma ;
Zhizhong Dong ;
Liming Yu .
Journal of Materials Science, 2013, 48 :1826-1836
12345