Influence of natural aging on the precipitation hardening of an AlMgSi alloy

被引:96
作者
Cuniberti, A. [1 ,3 ]
Tolley, A. [2 ,3 ]
Castro Riglos, M. V. [2 ,3 ]
Giovachini, R. [1 ]
机构
[1] Univ Nacl Ctr Prov Buenos Aires, Fac Ciencias Exactas, Inst Fis Mat Tandil, IFIMAT, RA-7000 Tandil, Argentina
[2] Comis Nacl Energia Atom, Ctr Atom Bariloche, RA-8400 San Carlos De Bariloche, Rio Negro, Argentina
[3] Consejo Nacl Invest Cient & Tecn, Buenos Aires, DF, Argentina
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2010年 / 527卷 / 20期
关键词
Aluminum alloys; Precipitation; Plasticity; MG-SI ALLOYS; ATOM-PROBE; AL; CLUSTERS; CU; STABILITY; KINETICS;
D O I
10.1016/j.msea.2010.05.003
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The influence of natural aging on precipitation hardening of an Al-Mg-Si alloy was investigated by mechanical testing and quantitative transmission electron microscopy. It was found that natural aging increases yield stress and reduces ductility, which is attributed to the formation of Mg/Si clusters. The evolution of tensile properties saturates after around 7 days natural aging. Artificial aging for 30 min at 180 degrees C after solution treatment resulted in an important increase in yield strength and loss of ductility, due to the rapid precipitation of the beta '' intermediate phase. Previous natural aging progressively reduces the strengthening effect of 30 min/180 degrees C artificial aging, completely suppressing it after 7 days pre-aging. Microhardness evolution during 180 degrees C artificial aging was followed in samples that were aged immediately after quenching, and with 7 days natural aging before artificial aging. In addition, microstructural characterization using TEM was carried out at specific artificial aging times. Previous natural aging was found to reduce the initial hardening rate, producing a delay in the formation of beta '' precipitates. The peak-aging condition was reached almost at the same aging time. However, longer beta '' precipitates with a lower volume fraction were observed when artificial aging was preceded by natural aging. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:5307 / 5311
页数:5
相关论文
共 22 条
  • [1] A method for thin foil thickness determination by transmission electron microscopy
    Castro Riglos, M. V.
    Tolley, A.
    [J]. APPLIED SURFACE SCIENCE, 2007, 254 (01) : 420 - 424
  • [2] Effects of excess Mg and Si on the isothermal ageing behaviours in the Al-Mg2Si alloys
    Doan, LC
    Nakai, K
    Matsuura, Y
    Kobayashi, S
    Ohmori, Y
    [J]. MATERIALS TRANSACTIONS, 2002, 43 (06) : 1371 - 1380
  • [3] A CALORIMETRIC STUDY OF PRECIPITATION IN COMMERCIAL ALUMINUM ALLOY-6061
    DUTTA, I
    ALLEN, SM
    [J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 1991, 10 (06) : 323 - 326
  • [4] The precipitation sequence in Al-Mg-Si alloys
    Edwards, GA
    Stiller, K
    Dunlop, GL
    Couper, MJ
    [J]. ACTA MATERIALIA, 1998, 46 (11) : 3893 - 3904
  • [5] Modeling of precipitation hardening in pre-aged AlMgSi(Cu) alloys
    Esmaeili, S
    Lloyd, DJ
    [J]. ACTA MATERIALIA, 2005, 53 (20) : 5257 - 5271
  • [6] Modeling of precipitation hardening for the naturally aged Al-Mg-Si-Cu alloy AA6111
    Esmaeili, S
    Lloyd, DJ
    Poole, WJ
    [J]. ACTA MATERIALIA, 2003, 51 (12) : 3467 - 3481
  • [7] Effect of composition on clustering reactions in AlMgSi(Cu) alloys
    Esmaeili, S
    Lloyd, DJ
    [J]. SCRIPTA MATERIALIA, 2004, 50 (01) : 155 - 158
  • [8] On the precipitation-hardening behavior of the Al-Mg-Si-Cu alloy AA6111
    S. Esmaeili
    X. Wang
    D. J. Lloyd
    W. J. Poole
    [J]. Metallurgical and Materials Transactions A, 2003, 34 (3) : 751 - 763
  • [9] Hirth J. P., 1968, Theory of Dislocations, V1
  • [10] LLOYD DJ, 1997, P THERMEC 97 MIN MET, P99