Development and Characterization of Pectin Films with Salicornia ramosissima: Biodegradation in Soil and Seawater

Pectin films were developed by incorporating a halophyte plant Salicornia ramosissima (dry powder from stem parts) to modify the film's properties. The films' physicomechanical properties, Fourier-transform infrared spectroscopy (FTIR), and microstructure, as well as their biodegradation capacity in soil and seawater, were evaluated. The inclusion of S. ramosissima significantly increased the thickness (0.25 +/- 0.01 mm; control 0.18 +/- 0.01 mm), color parameters a* (4.96 +/- 0.30; control 3.29 +/- 0.16) and b* (28.62 +/- 0.51; control 12.74 +/- 0.75), water vapor permeability (1.62 x 10(-9) +/- 1.09 x 10(-10) (g/m center dot s center dot Pa); control 1.24 x 10(-9) +/- 6.58 x 10(-11) (g/m center dot s center dot Pa)), water solubility (50.50 +/- 5.00%; control 11.56 +/- 5.56%), and elongation at break (5.89 +/- 0.29%; control 3.91 +/- 0.62%). On the other hand, L* (48.84 +/- 1.60), tensile strength (0.13 +/- 0.02 MPa), and Young's modulus (0.01 +/- 0 MPa) presented lower values compared with the control (L* 81.20 +/- 1.60; 4.19 +/- 0.82 MPa; 0.93 +/- 0.12 MPa), while the moisture content varied between 30% and 45%, for the film with S. ramosissima and the control film, respectively. The addition of S. ramosissima led to opaque films with relatively heterogeneous microstructures. The films showed also good biodegradation capacity-after 21 days in soil (around 90%), and after 30 days in seawater (fully fragmented). These results show that pectin films with S. ramosissima may have great potential to be used in the future as an eco-friendly food packaging material.