High strain-rate dynamic mechanical properties of Kevlar fabrics impregnated with shear thickening fluid

被引:84
作者
Cao, Saisai [1 ]
Chen, Qian [1 ]
Wang, Yunpeng [1 ]
Xuan, Shouhu [1 ]
Jiang, Wanquan [2 ]
Gong, Xinglong [1 ]
机构
[1] Univ Sci & Technol China, Dept Modern Mech, CAS Key Lab Mech Behav & Design Mat, Hefei 230027, Anhui, Peoples R China
[2] USTC, Dept Chem, Hefei 230026, Anhui, Peoples R China
基金
中国国家自然科学基金;
关键词
Fabrics/textiles; Nanoparticles; Impact behavior; Mechanical testing; Shear thickening fluid; YARN PULL-OUT; STAB-RESISTANCE; BALLISTIC IMPACT; BEHAVIOR; COMPOSITES; PERFORMANCE; PARTICLES; PRESSURE; STFS;
D O I
10.1016/j.compositesa.2017.04.015
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
To investigate the anti-impact mechanism, the mechanical property and energy absorption of the SIT impregnated Kevlar (STF/Kevlar) fabric at high strain rate were conducted using a split Hopkinson pressure bar (SHPB) system. The volume fraction of STF, number of fabric specimens, and impact velocity highly affected the dynamic mechanical performance of the STF/Kevlar composite. The energy transfer rate decreased from 0.85 to 0.01 once the number of fabric specimens increased from 2 layers to 8 layers. The strain rate stiffening mechanism of the STF/Kevlar was analyzed. The Kevlar fabrics underwent four sections during the impact process. The STF was mainly worked in the slip and deformation section by enhancing the friction between fabric yarns and preventing the fabric yarns from slipping. Overall, this work demonstrated that the multilayer Kevlar fabrics impregnated with high volume fraction of STF were the optimal choice for soft body armor. (C) 2017 Published by Elsevier Ltd.
引用
收藏
页码:161 / 169
页数:9
相关论文
共 46 条
[21]   Computational analysis of shear thickening fluid impregnated fabrics subjected to ballistic impacts [J].
Lee, Bok-Won ;
Kim, Chun-Gon .
ADVANCED COMPOSITE MATERIALS, 2012, 21 (02) :177-192
[22]   The ballistic impact characteristics of Kevlar® woven fabrics impregnated with a colloidal shear thickening fluid [J].
Lee, YS ;
Wetzel, ED ;
Wagner, NJ .
JOURNAL OF MATERIALS SCIENCE, 2003, 38 (13) :2825-2833
[23]   Dynamic stab resistance of ultra-high molecular weight polyethylene fabric impregnated with shear thickening fluid [J].
Li, Wei ;
Xiong, Dangsheng ;
Zhao, Xiaoduo ;
Sun, Liangliang ;
Liu, Jun .
MATERIALS & DESIGN, 2016, 102 :162-167
[24]   Magnetic Field-Induced Compressive Property of Magnetorheological Elastomer under High Strain Rate [J].
Liao, Guojiang ;
Gong, Xinglong ;
Xuan, Shouhu .
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2013, 52 (25) :8445-8453
[25]   An experimental investigation into the kinematics of a concentrated hard-sphere colloidal suspension during Hopkinson bar evaluation at high stresses [J].
Lim, Amanda S. ;
Lopatnikov, Sergey L. ;
Wagner, Norman J. ;
Gillespie, John W. .
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 2010, 165 (19-20) :1342-1350
[26]   Investigating the transient response of a shear thickening fluid using the split Hopkinson pressure bar technique [J].
Lim, Amanda S. ;
Lopatnikov, Sergey L. ;
Wagner, Norman J. ;
Gillespie, John W., Jr. .
RHEOLOGICA ACTA, 2010, 49 (08) :879-890
[27]   Investigation of impact resistance of multilayered woven composite barrier impregnated with the shear thickening fluid [J].
Lomakin, E. V. ;
Mossakovsky, P. A. ;
Bragov, A. M. ;
Lomunov, A. K. ;
Konstantinov, A. Yu. ;
Kolotnikov, M. E. ;
Antonov, F. K. ;
Vakshtein, M. S. .
ARCHIVE OF APPLIED MECHANICS, 2011, 81 (12) :2007-2020
[28]   Numerical simulation of the impact behaviors of shear thickening fluid impregnated warp-knitted spacer fabric [J].
Lu, Zhenqian ;
Wu, Liwei ;
Gu, Bohong ;
Sun, Baozhong .
COMPOSITES PART B-ENGINEERING, 2015, 69 :191-200
[29]   Compressive behaviors of warp-knitted spacer fabrics impregnated with shear thickening fluid [J].
Lu, Zhenqian ;
Jing, Xiaoying ;
Sun, Baozhong ;
Gu, Bohong .
COMPOSITES SCIENCE AND TECHNOLOGY, 2013, 88 :184-189
[30]   An analysis of deformation and energy absorption modes of shear thickening fluid treated Kevlar fabrics as soft body armour materials [J].
Majumdar, Abhijit ;
Butola, Bhupendra Singh ;
Srivastava, Ankita .
MATERIALS & DESIGN, 2013, 51 :148-153