Tension-tension fatigue behavior of hydroxyapatite reinforced polyetheretherketone composites

被引:80
作者
Tang, SM
Cheang, P
AbuBakar, MS
Khor, KA
Liao, K
机构
[1] Nanyang Technol Univ, Sch Mech & Prod Engn, Singapore 639798, Singapore
[2] Nanyang Technol Univ, Sch Mat Engn, Singapore 639798, Singapore
[3] Nanyang Technol Univ, Biomed Engn Res Ctr, Singapore 639798, Singapore
关键词
hydroxyapatite; polyetheretherketone; tension-tension fatigue; filler-matrix debonding; matrix cracking;
D O I
10.1016/S0142-1123(03)00080-X
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Hydroxyapatite (HA) particle reinforced polyetheretherketone (PEEK) composites with 5, 10, 20, 30, and 40% (by volume) HA content were subjected to tension-tension fatigue under load-controlled mode. Results of quasi-static tensile tests indicated that the tensile stiffness of the HA/PEEK composites increases while their tensile strength decreases, with an increase in HA content, up to 40% (by volume). Stress-life (SN) and stiffness degradation data were obtained. The fact that all of the specimens survived cyclic load at 50% ultimate tensile strength (and below) and the high estimated fatigue strength at I million cycles suggest that HA/PEEK composite is a promising fatigue-resistant material for biomedical applications. Microscopic examination of cyclically loaded specimens revealed evidence of interfacial failure between the filler and the PEEK matrix, and subsequent initiation and propagation of micro cracks in the matrix that cause fatigue failure. (C) 2003 Elsevier Ltd. All rights reserved.
引用
收藏
页码:49 / 57
页数:9
相关论文
共 14 条
  • [1] Abu Bakar MS, 1999, J MATER PROCESS TECH, V90, P462
  • [2] Characterization of a peek composite segmental bone replacement implant
    Corvelli, AA
    Roberts, JC
    Biermann, PJ
    Cranmer, JH
    [J]. JOURNAL OF MATERIALS SCIENCE, 1999, 34 (10) : 2421 - 2431
  • [3] ECHTERMEYER AT, 1995, COMPOSITES, V26, P10, DOI 10.1016/0010-4361(94)P3624-A
  • [4] Stability of hydroxyapatite while processing short-fibre reinforced hydroxyapatite ceramics
    Knepper, M
    Moricca, S
    Milthorpe, BK
    [J]. BIOMATERIALS, 1997, 18 (23) : 1523 - 1529
  • [5] Long-term environmental fatigue of pultruded glass-fiber-reinforced composites under flexural loading
    Liao, K
    Schultheisz, CR
    Hunston, DL
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 1999, 21 (05) : 485 - 495
  • [6] LIAO K, 1993, ASTM STP, P42
  • [7] REIFSNIDER KL, 1991, FATIGUE COMPOSITE MA
  • [8] THE MECHANICAL-BEHAVIOR OF PEEK SHORT-FIBER COMPOSITES
    SARASUA, JR
    REMIRO, PM
    POUYET, J
    [J]. JOURNAL OF MATERIALS SCIENCE, 1995, 30 (13) : 3501 - 3508
  • [9] Injection moulding of hydroxyapatite composites
    Sim, CP
    Cheang, P
    Liang, MH
    Khor, KA
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 69 (1-3) : 75 - 78
  • [10] Influences of thermal cycling and low-energy impact on the fatigue behavior of carbon/PEEK laminates
    Tai, NH
    Yip, MC
    Tseng, CM
    [J]. COMPOSITES PART B-ENGINEERING, 1999, 30 (08) : 849 - 865