High-temperature deformation in bulk polycrystalline hafnium carbide consolidated using spark plasma sintering

被引：7

作者：

Demirskyi, D. ^{[1
,2
,3
]}

Vasylkiv, O. ^{[2
]}

Yoshimi, K. ^{[3
]}

机构：

[1] Tohoku Univ, Adv Inst Mat Res AIMR, Aoba Ku, 2-1-1 Katahira, Sendai, Miyagi 9808577, Japan

[2] Natl Inst Mat Sci, 1-2-1 Sengen, Tsukuba, Ibaraki 3050047, Japan

[3] Tohoku Univ, Dept Mat Sci & Engn, 6-6-02 Aramaki Aza Aoba, Sendai, Miyagi 9808579, Japan

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2021年 / 41卷 / 15期

关键词：

Hafnium carbide; Grain size; Flexural strength; High-temperature materials; TANTALUM CARBIDE; IN-SITU; STRENGTH; BEHAVIOR; HFB2; HFC; TAC;

D O I：

10.1016/j.jeurceramsoc.2021.08.038

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this study, we report the three-point flexural strength and fracture toughness of monolithic hafnium carbide up to 2000 degrees C. HfC with different grain sizes was consolidated using the spark plasma sintering method. Coarsegrained monoliths showed a weak dependence on the strain rate during high-temperature tests at 1600 degrees C-2000 degrees C. In contrast, results for the ceramics with a grain size below 20 mu m indicated a positive dependence of the yield strength vs strain rate. This allowed us to identify the activation energy for high-temperature deformation in flexure as 370 kJ/mol. This level of activation energy is in satisfactory agreement with reports about the diffusion of C in hafnium carbide.

引用

页码：7442 / 7449

页数：8

共 50 条

[1] High-temperature deformation and consolidation of polycrystalline α-SiC by spark plasma sintering
Demirskyi, Dmytro
Sepehri-Amin, Hossein
Vasylkiv, Oleg O.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2025, 22 (02)
[2] High-temperature toughening in ternary medium-entropy (Ta1/3Ti1/3Zr1/3)C carbide consolidated using spark-plasma sintering
Demirskyi, D.
Nishimura, T.
Suzuki, T. S.
Sakka, Y.
Vasylkiv, O.
Yoshimi, K.
JOURNAL OF ASIAN CERAMIC SOCIETIES, 2020, 8 (04): : 1262 - 1270
[3] High-temperature flexural strength performance of ternary high-entropy carbide consolidated via spark plasma sintering of TaC, ZrC and NbC
Demirskyi, D.
Borodianska, H.
Suzuki, T. S.
Sakka, Y.
Yoshimi, K.
Vasylkiv, O.
SCRIPTA MATERIALIA, 2019, 164 : 12 - 16
[4] High-temperature strength and plastic deformation behavior of niobium diboride consolidated by spark plasma sintering
Demirskyi, Dmytro
Solodkyi, Ievgen
Nishimura, Toshiyuki
Sakka, Yoshio
Vasylkiv, Oleg
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2017, 100 (11) : 5295 - 5305
[5] High-Temperature Strength of Boron Suboxide Ceramic Consolidated by Spark Plasma Sintering
Demirskyi, Dmytro
Solodkyi, Ievgen
Sakka, Yoshio
Vasylkiv, Oleg
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2016, 99 (08) : 2769 - 2777
[6] Solid solution synthesis of tantalum carbide-hafnium carbide by spark plasma sintering
Zhang, Cheng
Gupta, Ankur
Seal, Sudipta
Boesl, Benjamin
Agarwal, Arvind
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2017, 100 (05) : 1853 - 1862
[7] Mechanical properties of nanostructured silicon carbide consolidated by spark plasma sintering
Lorrette, Christophe
Reau, Adrien
Briottet, Laurent
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (01) : 147 - 156
[8] Graphene NanoPlatelets reinforced tantalum carbide consolidated by spark plasma sintering
Nieto, Andy
Lahiri, Debrupa
Agarwal, Arvind
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 582 : 338 - 346
[9] Fracture resistance of binderless tungsten carbide consolidated by spark plasma sintering and flash sintering
Mazo, Isacco
Monclus, Miguel A.
Molina-Aldareguia, Jon M.
Sglavo, Vincenzo M.
OPEN CERAMICS, 2024, 17
[10] Ultra-high-temperature tantalum-hafnium carbonitride ceramics fabricated by combustion synthesis and spark plasma sintering
Buinevich, V. S.
Nepapushev, A. A.
Moskovskikh, D. O.
Kuskov, K., V
Yudin, S. N.
Mukasyan, A. S.
CERAMICS INTERNATIONAL, 2021, 47 (21) : 30043 - 30050

← 1 2 3 4 5 →