Recycling Thermoset Epoxy Resin Using Alkyl-Methyl-Imidazolium Ionic Liquids as Green Solvents

Herein, a solvent-based green recycling procedure is reported for recycling thermoset epoxy resins (TERs) and carbon fiber reinforced epoxy composites (CFRECs) employing ionic liquids (ILs) and alcohols under mild conditions. With melting points less than 100 degrees C, ILs are defined as organic salts, typically composed of bulky cations with organic or inorganic counteranions. As a result of their unique physical properties such as low vapor pressure, relatively high thermal stability, and multifunctional tunability, these solvents are often classified as "green solvents" as compared to traditional organic solvents. In this study, swelling and dissolution of TER are evaluated in the presence of pure alkyl-methyl-imidazolium ILs, alcohols, and various mixtures of these co-solvents to determine their swelling and depolymerization capacity at mild temperatures in the absence of catalysts. In these studies, three ILs with different alkyl lengths were evaluated: 1-butyl-3-methyl imidazolium chloride ([BMIm][Cl]), 1-hexyl-3-methyl imidazolium bromide ([HMIm][Br]), and 1-octyl-3-methyl imidazolium bromide ([OMIm][Br]) along with two alcohols: ethylene glycol (EG) and glycerol (Gly). The highest swelling capacity of TER at 150 degrees C was achieved by a combination of [BMIm][Cl] and EG. In addition, swelling and dissolution of TER were evaluated in the presence of several anion variants of 1-butyl-3-methyl-imidazolium ILs with EG. Complete dissolution of both TERs and CFRECs was achieved in 150 min (2.5 h) at 150 degrees C under atmospheric pressure. Finally, recovery and reuse of the recycled monomer after dissolution were examined. Recovered epoxy monomers employed to synthesize a recycled TER exhibited similar mechanical properties to the parent TER In addition, it was demonstrated that carbon fibers could be successfully recovered from CFREC using the recycling method detailed in this manuscript.