Thin film solar cell using earth abundant Cu2SnS3 (CTS) fabricated through spray pyrolysis: Influence of precursors

被引:38
作者
Sunny, Gincy [1 ]
Thomas, Titu [2 ]
Deepu, D. R. [1 ]
Kartha, C. Sudha [1 ]
Vijayakumar, K. P. [1 ]
机构
[1] Cochin Univ Sci & Technol, Dept Phys, Cochin 682022, Kerala, India
[2] Nirmala Coll, Dept Phys, Muvattupuzha 686661, Kerala, India
来源
OPTIK | 2017年 / 144卷
关键词
Cu2SnS3; Chemical spray pyrolysis; Thin film solar cell; OPTICAL-PROPERTIES;
D O I
10.1016/j.ijleo.2017.06.105
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
This paper reports optimization and characterization of Cu2SnS3 (CTS) thin films prepared using simple and economical Chemical Spray Pyrolysis (CSP) technique. Effect of tin precursor (stannic/stannous chloride) on the structural, optical, electrical and morphological properties of CTS thin films were studied. Films have tetragonal structure. It was observed that films prepared using stannic chloride had optimum band gap for solar cell application. Hall measurement results proved that all samples were p-type having electrical resistivity of similar to 10(-3) ohm cm. Using these films, Cu2SnS3 (CTS)/In2S3 (InS) solar cells were prepared (with structure ITO/CTS/InS/Ag). Solar cell fabricated with stannic chloride precursor shows four times enhancement in cell efficiency. (C) 2017 Elsevier GmbH. All rights reserved.
引用
收藏
页码:263 / 270
页数:8
相关论文
共 28 条
[1]   Preparation and characterization of Cu2SnS3 ternary semiconductor nanostructures via the spray pyrolysis technique for photovoltaic applications [J].
Adelifard, Mehdi ;
Mohagheghi, Mohamad Mehdi Bagheri ;
Eshghi, Hosein .
PHYSICA SCRIPTA, 2012, 85 (03)
[2]   Fabrication of Cu2SnS3 thin films by sulfurization of evaporated Cu-Sn precursors for solar cells [J].
Aihara, Naoya ;
Araki, Hideaki ;
Takeuchi, Akiko ;
Jimbo, Kazuo ;
Katagiri, Hironori .
PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 10, NO 7-8, 2013, 10 (7-8) :1086-1092
[3]   A new procedure to prepare semiconducting ternary compounds from binary buffer materials and vacuum-deposited copper for photovoltaic applications [J].
Amlouk, A. ;
Boubaker, K. ;
Amlouk, M. .
VACUUM, 2010, 85 (01) :60-64
[4]  
[Anonymous], 2015, AUST J BASIC APPL SC
[5]   Raman analysis of monoclinic Cu2SnS3 thin films [J].
Berg, Dominik M. ;
Djemour, Rabie ;
Guetay, Levent ;
Siebentritt, Susanne ;
Dale, Phillip J. ;
Fontane, Xavier ;
Izquierdo-Roca, Victor ;
Perez-Rodriguez, Alejandro .
APPLIED PHYSICS LETTERS, 2012, 100 (19)
[6]   Growth of Cu2SnS3 thin films by solid reaction under sulphur atmosphere [J].
Bouaziz, M. ;
Ouerfelli, J. ;
Srivastava, S. K. ;
Bernede, J. C. ;
Amlouk, M. .
VACUUM, 2011, 85 (08) :783-786
[7]   Effect of Cu/Sn Concentration Ratio on the Phase Equilibrium-Related Properties of Cu-Sn-S Sprayed Materials [J].
Bouaziz, M. ;
Boubaker, K. ;
Amlouk, M. ;
Belgacem, S. .
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 2010, 31 (06) :498-503
[8]   Structural and optical properties of Cu2SnS3 sprayed thin films [J].
Bouaziz, M. ;
Amlouk, M. ;
Belgacem, S. .
THIN SOLID FILMS, 2009, 517 (07) :2527-2530
[9]   Effect of annealing temperature on the properties of spray deposited Cu2SnS3 thin films [J].
Chalapathi, U. ;
Jayasree, Y. ;
Uthanna, S. ;
Raja, V. Sundara .
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2013, 210 (11) :2384-2390
[10]   Preparation of Nanostructured Cu2SnS3 Photocatalysts by Solvothermal Method [J].
Chen, Qingyun ;
Ma, Di .
INTERNATIONAL JOURNAL OF PHOTOENERGY, 2013, 2013