Effect of Ni3Al addition on the grain growth in porous Ni/Ni3Al anode materials for molten carbonate fuel cell

被引:2
作者
Kim, YS
Lee, SI
Lim, JH
Chun, HS [1 ]
机构
[1] Korea Univ, Dept Chem Engn, Seoul 136701, South Korea
[2] Pukyong Natl Univ, Dept Chem Engn, Pusan 608739, South Korea
关键词
Zener equation; grain size; Ni-3; anode; MCFC;
D O I
10.1252/jcej.34.979
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Grain growth of high-density material, such as metal, during sintering was generally retarded by the pinning effect of the second phase particles which were included between the matrix metal grains. Grain size of the high-density material was inversely proportional to the 0.31-1.0th order with respect to the volume fraction of the second phase particles, and the grain was maintained at a relatively smaller size than that sintered without the second phase particles. It was investigated that the nickel grain size in the porous Ni/Ni3Al anode material for MCFC sintered for 1 hr at 900 degreesC was inversely proportional to the 0.7th order with respect to the volume fraction of the Ni3Al intermetallics, and that the pore network in the anode was more stable than that in the pure Ni anode material by controlling the subsequent sintering process.
引用
收藏
页码:979 / 984
页数:6
相关论文
共 47 条
[21]   Electrochemical behaviour of Ni+Al alloy as an alternative material for molten carbonate fuel cell cathodes [J].
Kudo, T ;
Hisamitsu, Y ;
Kihara, K ;
Mohamedi, M ;
Uchida, I .
JOURNAL OF APPLIED ELECTROCHEMISTRY, 2002, 32 (02) :179-184
[22]   The sliding wear of TiC and Ti(C,N) cermets prepared with a stoichiometric Ni3Al binder [J].
Stewart, Tyler L. ;
Plucknett, Kevin P. .
WEAR, 2014, 318 (1-2) :153-167
[23]   Differential speed rolling of Ni3Al based intermetallic alloy-Analysis of the deformation process [J].
Polkowski, Wojciech ;
Jozwik, Pawel ;
Bojar, Zbigniew .
MATERIALS LETTERS, 2015, 139 :46-49
[24]   Enhancing Ni anode performance via Gd2O3 addition in molten carbonate-type direct carbon fuel cell [J].
Lee, Eun-Kyung ;
Chun, Ho Hwan ;
Kim, Yong-Tae .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (29) :16541-16547
[25]   Enhancement of hardness and thermal stability of W-doped Ni3Al thin films at elevated temperature [J].
Zhang, Chao ;
Feng, Kai ;
Li, Zhuguo ;
Lu, Fenggui ;
Huang, Jian ;
Wu, Yixiong ;
Chu, Paul. K. .
MATERIALS & DESIGN, 2016, 111 :575-583
[26]   The effect of precipitants on Ni-Al2O3 catalysts prepared by a co-precipitation method for internal reforming in molten carbonate fuel cells [J].
Jung, You-Shick ;
Yoon, Wang-Lai ;
Seo, Yong-Seog ;
Rhee, Young-Woo .
CATALYSIS COMMUNICATIONS, 2012, 26 :103-111
[27]   Electrolyte effect on the catalytic performance of Ni-based catalysts for direct internal reforming molten carbonate fuel cell [J].
Li, ZhenLan ;
Devianto, Hary ;
Yoon, Sung Pil ;
Han, Jonghee ;
Lim, Tae-Hoon ;
Lee, Ho-In .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (23) :13041-13047
[28]   Effect of Al and Ni on Phase Transformation and Properties of 1Cr9Al(1-3)Ni(1-7)WVNbB Alloy [J].
Zhao Manman ;
Guo Dong ;
Qin Sen ;
Feng Jie ;
Dai Yongjuan .
RARE METAL MATERIALS AND ENGINEERING, 2021, 50 (08) :2823-2830
[29]   The effect of Ni content on a highly active Ni-Al2O3 catalyst prepared by the homogeneous precipitation method [J].
Seo, Yong-Seg ;
Jung, You-Shick ;
Yoon, Wang-Lai ;
Jang, In-Gab ;
Lee, Tae-Won .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2011, 36 (01) :94-102
[30]   Modification of NI-based cathode material for molten carbonate fuel cells using Co3O4 [J].
Kim, Young-Suk ;
Yi, Cheol-Woo ;
Choi, Hee Seon ;
Kim, Keon .
JOURNAL OF POWER SOURCES, 2011, 196 (04) :1886-1893