Tribological behaviour at various temperatures of WC-Co coatings prepared using different thermal spraying techniques

被引：83

作者：

Geng, Zhe ^{[1
]}

Hou, Sihan ^{[2
]}

Shi, Gaolian ^{[1
]}

Duan, Deli ^{[2
]}

Li, Shu ^{[2
]}

机构：

[1] Suzhou Inst Ind Technol, Dept Precis Mfg Engn, Suzhou 215104, Peoples R China

[2] Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China

来源：

TRIBOLOGY INTERNATIONAL | 2016年 / 104卷

关键词：

WC-Co coating; High temperature; Friction and wear; Microstructure; ABRASIVE WEAR-RESISTANCE; ELEVATED-TEMPERATURES; OXIDATION BEHAVIOR; CERMET COATINGS; STAINLESS-STEEL; AIR; NI; MICROSTRUCTURE; NANOCOMPOSITE; CARBIDES;

D O I：

10.1016/j.triboint.2016.08.025

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Tribological performance of WC-12Co coatings prepared via air plasma spraying (APS), low-pressure plasma spraying (LPPS) and high-velocity air-fuel spraying (HVAF) at temperatures ranging from room temperature (RT, similar to 25 degrees C) to 650 degrees C was investigated. Relationships between the microstructure and tribological behaviour of coatings were discussed. Results show that the plasma-sprayed coatings exhibited more brittle phases, pores and microcracks, which provided the coatings with low hardness, toughness and oxidation resistance, promoted the coating splat delamination during friction and consequently led to the high wear rate. The HVAF coating had fewer brittle phases, fewer pores and more WC particles, which improved the mechanical properties and oxidation resistance, avoided the coating splat delamination, promoted CoWO4 formation and consequently exhibited the better wear resistance. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：36 / 44

页数：9

共 33 条

[1] Comparison of the oxidation behaviour of WC-Co and WC-Ni-Co-Cr cemented carbides
Aristizabal, M.
Sanchez, J. M.
Rodriguez, N.
Ibarreta, F.
Martinez, R.
[J]. CORROSION SCIENCE, 2011, 53 (09) : 2754 - 2760
[2] Comparison of high temperature wear behaviour of plasma sprayed WC-Co coated and hard chromium plated AISI 304 austenitic stainless steel
Balamurugan, G. M.
Duraiselvam, Muthukannan
Anandakrishnan, V.
[J]. MATERIALS & DESIGN, 2012, 35 : 640 - 646
[3] Oxidation behavior of WC-Co
Basu, SN
Sarin, VK
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 209 (1-2): : 206 - 212
[4] Berger LM, 2005, P INT THERM SPRAY C, P8
[5] Research on the Friction and Wear Behavior at Elevated Temperature of Plasma-Sprayed Nanostructured WC-Co Coatings
Chen, Hui
Gou, Guoqing
Tu, Mingjing
Liu, Yan
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (01) : 1 - 6
[6] Characteristics of nano particles and their effect on the formation of nanostructures in air plasma spraying WC-17Co coating
Chen, Hui
Gou, Guoqing
Tu, Mingjing
Liu, Yan
[J]. SURFACE & COATINGS TECHNOLOGY, 2009, 203 (13) : 1785 - 1789
[7] Kinetics inversion in isothermal oxidation of uncoated WC-based carbides between 450 and 800 °C
del Campo, L.
Perez-Saez, R. B.
Gonzalez-Fernandez, L.
Tello, M. J.
[J]. CORROSION SCIENCE, 2009, 51 (04) : 707 - 712
[8] Tribological Characterization of WC-Co Plasma Sprayed Coatings
Di Girolamo, Giovanni
Pilloni, Luciano
Pulci, Giovanni
Marra, Francesco
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2009, 92 (05) : 1118 - 1124
[9] Wear behavior of thermally sprayed coatings under different loading conditions
Duan, DL
Li, S
Duan, XH
Li, SZ
[J]. TRIBOLOGY TRANSACTIONS, 2005, 48 (01) : 45 - 50
[10] A crystal chemical approach to the formulation of self-lubricating nanocomposite coatings
Erdemir, A
[J]. SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6) : 1792 - 1796

← 1 2 3 4 →