Perforated Rib in Turbulent Boundary Layer

被引:0
作者
Afanasiev, Valery N. [1 ]
Kong, Dehai [1 ]
Isaev, S. A. [2 ]
机构
[1] Bauman Moscow State Tech Univ, Dept Thermophys, 2nd Baumanskaya St,5, Moscow 105005, Russia
[2] St Petersburg State Univ Civil Aviat, Dept Mech, Pilotss St 38, St Petersburg 196210, Russia
来源
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME | 2020年 / 142卷 / 02期
基金
俄罗斯基础研究基金会;
关键词
perforated rib; experimental investigation; turbulent boundary layer; heat transfer enhancement; HEAT-TRANSFER; CHANNEL; FLOW; ENHANCEMENT;
D O I
10.1115/1.4045308
中图分类号
O414.1 [热力学];
学科分类号
摘要
This study presents the results of the experimental study on hydrodynamics and heat transfer in separation zone in front and behind a single rectangular perforated rib mounted on a flat plate. The effects of perforation open-area ratio (beta=12%, 23.5%, and 44%) and the location of the hole on the rib (at the bottom, at the top, and in a staggered arrangement) on the mean and fluctuating characteristics of the turbulent dynamic and thermal boundary layers in the median section of the plate were examined. It was established that the stagnant and recirculation zones in the front and behind the perforated rib were shifted and became smaller or disappeared.
引用
收藏
页数:7
相关论文
共 15 条