Analysis on thermal effect on high-speed wheel/rail adhesion under interfacial contamination using a three-dimensional model with surface roughness

被引：23

作者：

Wu, Bing ^{[1
,2
]}

Wen, Zefeng ^{[1
]}

Wu, Tao ^{[1
]}

Jin, Xuesong ^{[1
]}

机构：

[1] Southwest Jiaotong Univ, State Key Lab Tract Power, Chengdu 610031, Sichuan, Peoples R China

[2] Soochow Univ, Sch Urban Rail Translat, Suzhou, Jiangsu, Peoples R China

来源：

WEAR | 2016年 / 366卷

关键词：

Wheel/rail adhesion; Interfacial contamination; Thermal effect; Elastic-plastic contact; Rolling contact; WET CONDITIONS; CONTACT; WATER; RAIL; OIL;

D O I：

10.1016/j.wear.2016.06.002

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A three-dimensional numerical model of wheel/rail in rolling contact is established to study the adhesion characteristics under interfacial contamination considering surface roughness at high speed. The thermal partial elastohydrodynamic lubrication (EHL) theory in elliptical contact is used in the model. The numerical model is successfully solved by applying the iterative algorithm between the pressure field and temperature field. Multilevel method is used to solve modified Reynolds equation. Sweeping column method is used to solve energy and heat conduction equations. The effects of train speed, surface roughness amplitudes, roughness orientation and axle load on the adhesion coefficient under interfacial contamination are numerically investigated. A typical creepage-traction curve under oil contamination is obtained at high speed by the present model. In addition, the effects of temperature and the elastic plastic deformation behaviour of asperities on the adhesion coefficient are discussed in the paper. Furthermore, the effect of different interfacial contaminations on wheel/rail adhesion using the present model on the adhesion coefficient is investigated. In order to validate the present model, the numerical results are compared with the experimental results that were obtained by JD-2 high-speed wheel/rail rolling contact machine under water/oil contaminations. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：95 / 104

页数：10

共 32 条

[21] A GENERALIZED REYNOLDS-EQUATION FOR NON-NEWTONIAN THERMAL ELASTOHYDRODYNAMIC LUBRICATION [J].

PEIRAN, Y ;

SHIZHU, W .

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1990, 112 (04) :631-&

[22]

Roelands C.J.A., 1966, Correlational Aspects of the Viscosity-Temperature-Pressure Relationship of Lubricating Oils

[23] Friction in wheel-rail contact: A model comprising interfacial fluids, surface roughness and temperature [J].

Tomberger, Christoph ;

Dietmaier, Peter ;

Sextro, Walter ;

Six, Klaus .

WEAR, 2011, 271 (1-2) :2-12

[24]

VENNER CH, 1990, J TRIBOL-T ASME, V112, P426, DOI 10.1115/1.2920277

[25] Multigrid techniques: a fast and efficient method for the numerical simulation of elastohydrodynamically lubricated point contact problems [J].

Venner, CH ;

Lubrecht, AA .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2000, 214 (J1) :43-62

[26] Sub-scale simulation and measurement of railroad wheel/rail adhesion under dry and wet conditions [J].

Wang, W. J. ;

Wang, H. ;

Wang, H. Y. ;

Guo, J. ;

Liu, Q. Y. ;

Zhu, M. H. ;

Jin, X. S. .

WEAR, 2013, 302 (1-2) :1461-1467

[27] Study on the adhesion behavior of wheel/rail under oil, water and sanding conditions [J].

Wang, W. J. ;

Zhang, H. F. ;

Wang, H. Y. ;

Liu, Q. Y. ;

Zhu, M. H. .

WEAR, 2011, 271 (9-10) :2693-2698

[28] Numerical analysis on wheel/rail adhesion under mixed contamination of oil and water with surface roughness [J].

Wu, Bing ;

Wen, Zefeng ;

Wang, Hengyu ;

Jin, Xuesong .

WEAR, 2014, 314 (1-2) :140-147

[29]

Wu Bing, 2013, P I MECH ENG J-J ENG, V271, P1306

[30]

YANG Y, 1998, J CHINA RAILW SOC, V20, P31

← 1 2 3 4 →