Hybrid composites manufactured by resin infusion with a fully recyclable bioepoxy resin

被引：58

作者：

Cicala, G. ^{[1
]}

Pergolizzi, E. ^{[1
]}

Piscopo, F. ^{[1
]}

Carbone, D. ^{[2
]}

Recca, G. ^{[2
]}

机构：

[1] Univ Catania, DICAR, Viale Andrea Doria 6, I-95125 Catania, Italy

[2] CNR ICTP, Via Paolo Gaifami 17, I-95100 Catania, Italy

来源：

COMPOSITES PART B-ENGINEERING | 2018年 / 132卷

关键词：

Flax; Kenaf; Recycling; Resin infusion; Epoxy; Fused deposition modelling; LIFE-CYCLE ASSESSMENT; REINFORCED POLYESTER COMPOSITES; CARBON FIBRE/EPOXY COMPOSITES; NATURAL FIBER COMPOSITES; MECHANICAL-PROPERTIES; EPOXY; FLAX; HEMP; BEHAVIOR; POLYMER;

D O I：

10.1016/j.compositesb.2017.08.015

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Bioepoxy based monomers were formulated with a cure inhibitor and a cleavable amine to obtain a recyclable epoxy system suitable for resin infusion at room temperature. Hybrid flax/carbon fiber layup were used. Tensile, flexural and dynamo-mechanical properties for the composites were studied. The cured laminates were chemically recycled obtaining from the epoxy matrix a thermoplastic. The recycled was processed by fused deposition modelling (FDM) and injection molding after mixing with short kenaf fibers. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：69 / 76

页数：8

共 42 条

[1] Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites [J].