High porosity cellulose nanopapers as reinforcement in multi-layer epoxy laminates

被引：22
|
作者：
Mautner, Andreas [1 ,2 ]
Nawawi, Wan M. F. W. [1 ,2 ,3 ]
Lee, Koon-Yang [4 ]
Bismarck, Alexander [1 ,2 ,5 ]
机构：
[1] Univ Vienna, Polymer & Composite Engn PaCE Grp, Inst Mat Chem & Res, Wahringerstr 42, A-1090 Vienna, Austria
[2] Imperial Coll London, Dept Chem Engn, Polymer & Composite Engn PaCE Grp, South Kensington Campus, London SW7 2AZ, England
[3] Int Islamic Univ Malaysia, Dept Biotechnol Engn, POB 10, Kuala Lumpur 50278, Malaysia
[4] Imperial Coll London, Dept Aeronaut, South Kensington Campus, London SW7 2AZ, England
[5] Univ Johannesburg, Fac Engn & Built Environm, Dept Mech Engn, Johannesburg, South Africa
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2020年 / 131卷
关键词：
Cellulose A; Laminates A; Prepreg A; Thermosetting resin A; BACTERIAL CELLULOSE; COMPOSITES; NANOCELLULOSE; BIOCOMPOSITES; NETWORKS; MORPHOLOGY; POLYMERS; STRENGTH; DESIGN; PAPER;
D O I：
10.1016/j.compositesa.2020.105779
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Utilizing high-performance cellulose nanopapers as 2D-reinforcement for polymers allows for realizing high-loading-fraction (80 vol.-%), high-performance (strength >150 MPa, modulus >10 GPa) laminated nanopaper reinforced epoxy composites. Such cellulose nanopapers are inherently dense, which renders them difficult to be impregnated with the epoxy-resin. High-porosity nanopapers facilitate better resin impregnation, truly utilizing the properties of single cellulose nanofibres instead of the nanofibre network. We report the use of high-porosity (74%) but low strength and modulus bacterial cellulose (BC) nanopapers, prepared from BC-in-ethanol dispersion, as reinforcement for epoxy-resin. High-porosity nanopapers allowed for full impregnation of the BC-nanopapers with epoxy-resin. The resulting BC-reinforced epoxy-laminates possessed high tensile modulus (9 GPa) and strength (100 MPa) at a BC loading of 30 vol.-%, resulting from very low void-fraction (3 vol.-%) of these papregs compared to conventional nanopaper-laminates (10+ vol.-%). Better resin impregnation of less dense nanocellulose networks allowed for maximum utilization of stiffness/strength of cellulose nanofibrils.
引用
收藏
页数：9
相关论文
共 45 条
  • [1] Multi-layer polymer metal laminates for the fire protection of lightweight structures
    Christke, S.
    Gibson, A. G.
    Grigoriou, K.
    Mouritz, A. P.
    MATERIALS & DESIGN, 2016, 97 : 349 - 356
  • [2] Cationised Fibre-Based Cellulose Multi-Layer Membranes for Sterile and High-Flow Bacteria Retention and Inactivation
    Kokol, Vanja
    Kos, Monika
    Vivod, Vera
    Gunde-Cimerman, Nina
    MEMBRANES, 2023, 13 (03)
  • [3] Interfacial Treatment of Multi-Layer Woven Silk Reinforced Epoxy Composites
    Zulkifli, Rozli
    Azhari, Che Husna
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 1697 - 1700
  • [4] Multi-layer anodes for high-current applications
    Hamedi, Amir-Sina
    Yao, Adrian
    Martin, Roxana
    Roig, Raymundo
    Valadez, Michael Rivas
    Pile, Donald
    Shellikeri, Annadanesh
    Liu, Baichuan
    Wheeler, Dean R.
    ELECTROCHIMICA ACTA, 2023, 439
  • [5] Mechanical response of multi-layer bacterial cellulose nanopaper reinforced polylactide laminated composites
    Hervy, Martin
    Blaker, Jonny J.
    Braz, Ana Leticia
    Lee, Koon-Yang
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2018, 107 : 155 - 163
  • [6] Optimized mechanical and impact performance of high strength tempo oxidized cellulose nanofibril (TOCNF)-epoxy laminates
    Forti, Endrina S.
    Jimenez, Daniela B.
    Schueneman, Gregory T.
    Moon, Robert J.
    Youngblood, Jeffrey P.
    CELLULOSE, 2021, 28 (17) : 10969 - 10985
  • [7] Optimized mechanical and impact performance of high strength tempo oxidized cellulose nanofibril (TOCNF)—epoxy laminates
    Endrina S. Forti
    Daniela B. Jimenez
    Gregory T. Schueneman
    Robert J. Moon
    Jeffrey P. Youngblood
    Cellulose, 2021, 28 : 10969 - 10985
  • [8] Multi-layer oil-resistant food serving containers made using cellulose nanofiber coated wood flour composites
    Hossain, Rakibul
    Tajvidi, Mehdi
    Bousfield, Douglas
    Gardner, Douglas J.
    CARBOHYDRATE POLYMERS, 2021, 267
  • [9] A Conceptual Multi-Layer Framework for the Detection of Nighttime Pedestrian in Autonomous Vehicles Using Deep Reinforcement Learning
    Farooq, Muhammad Shoaib
    Khalid, Haris
    Arooj, Ansif
    Umer, Tariq
    Asghar, Aamer Bilal
    Rasheed, Jawad
    Shubair, Raed M. M.
    Yahyaoui, Amani
    ENTROPY, 2023, 25 (01)
  • [10] Multi-layer Barrier Coating Technology Using Nano-fibrillated Cellulose and a Hydrophobic Coating Agent
    Jo, Hae Min
    Kim, Do Hoon
    Lee, Soo Hyun
    Lee, Ji Young
    BIORESOURCES, 2022, 17 (04): : 6222 - 6233
12345