Application of vibroacoustic signals to evaluate tools profile changes in friction stir welding on AA 1050 H24 alloy

被引：15
作者：
Blanco Fernandez, J. [2 ]
Sanchez Roca, A. [1 ]
Carvajal Fals, H. [1 ]
Jimenez Macias, E. [3 ]
Perez de la Parte, M. [2 ]
机构：
[1] Univ Oriente, Fac Mech Engn, Santiago De Cuba 90900, Cuba
[2] Univ La Rioja, Dept Mech Engn, La Rioja, Spain
[3] Univ La Rioja, Dept Elect Engn, La Rioja, Spain
来源：
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2012年 / 17卷 / 06期
关键词：
Friction stir welding; Tool profile; Vibration; Signal processing; Wavelet transform; Aluminium; ACOUSTIC-EMISSION; STABILITY ANALYSIS; PIN PROFILE; FSW JOINTS; GEOMETRY;
D O I：
10.1179/1362171812Y.0000000040
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a study to evaluate the effect of the tool profile on friction stir welding (FSW) process in the aluminium AA 1050, using vibroacoustic signals. The vibroacoustic signals in Z and Y directions have been acquired by the AE instrument NI USB-9234. The characterisation in time and frequency domains and the statistical analysis of vibroacoustical signal have been carried out in order to correlate them with the design of two different tools. Statistical and temporal parameters of discomposed vibroacoustical signals using wavelet transform have been used for filtering vibration signal to eliminate the noise of the FSW machine and the extraction features of them. The analysis has confirmed that the vibroacoustical signals were significantly affected by changes in the tool profiles. Finally, it has been demonstrated that signals generated by this process can be effectively used to characterise the changes on tool design.
引用
收藏
页码：501 / 510
页数：10
相关论文
共 15 条
[1]   Wavelet transform analysis of acoustic emission in monitoring friction stir welding of 6061 aluminum [J].
Chen, CM ;
Kovacevic, R ;
Jandgric, D .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (13) :1383-1390
[2]   Effect of shoulder geometry on residual stress and fatigue properties of AA6082 fsw joints [J].
De Giorgi, M. ;
Scialpi, A. ;
Panella, F. W. ;
De Filippis, L. A. C. .
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2009, 23 (01) :26-35
[3]   Characterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented tool [J].
Hattingh, D. G. ;
Blignault, C. ;
van Niekerk, T. I. ;
James, M. N. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 203 (1-3) :46-57
[4]   Time-frequency diagram applied to stability analysis in gas metal arc welding based on acoustic emission [J].
Jimenez Macias, E. ;
Sanchez Roca, A. ;
Carvajal Fals, H. ;
Blanco Fernandez, J. ;
Perez de la Parte, M. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2010, 15 (03) :226-232
[5]   Understanding the material flow path of friction stir welding process using unthreaded tools [J].
Lorrain, Olivier ;
Favier, Veronique ;
Zahrouni, Hamid ;
Lawrjaniec, Didier .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (04) :603-609
[6]   Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy - An experimental approach [J].
Padmanaban, G. ;
Balasubramanian, V. .
MATERIALS & DESIGN, 2009, 30 (07) :2647-2656
[7]   Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc welding [J].
Pal, Kamal ;
Bhattacharya, Sandip ;
Pal, Surjya K. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (10) :1397-1410
[8]  
Roca A. S., 2007, SCI TECHNOL WELD JOI, V15, P131
[9]   Artificial neural networks and acoustic emission applied to stability analysis in gas metal arc welding [J].
Sanchez Roca, A. ;
Fals, H. C. ;
Fernandez, J. B. ;
Macias, E. J. ;
de la Parte, M. P. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2009, 14 (02) :117-124
[10]   Electrical conductivity field analysis for evaluation of FSW joints in AA6013 and AA7075 alloys [J].
Santos, T. G. ;
Vilaca, P. ;
Miranda, R. M. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (02) :174-180
12