Modified Mohr-Coulomb criterion for non-linear triaxial and polyaxial strength of jointed rocks

Rocks encountered in civil and mining engineering fields are invariably jointed and act under triaxial or polyaxial stress conditions. The Mohr-Coulomb shear strength criterion is the most widely used criterion for jointed rocks. In its present form there are two major limitations of this criterion; firstly it considers the strength response to be linear, and, secondly the effect of the intermediate principal stress on the strength behaviour is ignored. A modified non-linear form of Mohr-Coulomb strength criterion has been suggested in this study to overcome these limitations. Barton's concept of critical state for rocks has been imbibed in the linear Mohr-Coulomb criterion to deduce a semi-empirical expression for non-linear criterion. However, the shear strength parameters of the conventional Mohr-Coulomb criterion are used in the proposed criterion. The proposed criterion is a simple and rational nonlinear polyaxial strength criterion for anisotropic jointed rocks. In an earlier publication 111 the applicability of the criterion was evaluated for intact rocks. In present paper the criterion is extended to jointed rocks, which are anisotropic in nature. The applicability of the proposed criterion has been verified by applying it to extensive experimental data on triaxial and polyaxial test results on jointed rocks available from literature. Applicability of the criterion, to explain rock burst conditions for some Indian rocks, is also demonstrated. (C) 2012 Elsevier Ltd. All rights reserved.