Effect of post-rolling annealing treatment and thickness of nickel coating on the bond strength of Al-Cu strips in cold roll bonding process

被引：65

作者：

Shabani, Ali ^{[1
]}

Toroghinejad, Mohammad Reza ^{[1
]}

Shafyei, Ali ^{[1
]}

机构：

[1] Isfahan Univ Technol, Dept Mat Engn, Esfahan 8415683111, Iran

来源：

MATERIALS & DESIGN | 2012年 / 40卷

关键词：

Non-ferrous metals and alloys; Film and sheet; Metallography; MECHANICAL-PROPERTIES; PARTICLES;

D O I：

10.1016/j.matdes.2012.03.052

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, the effect of coating nickel and also its different thicknesses on the bond strength of Al-Ni-Cu layers was investigated. Furthermore, the effect of reduction in thickness and post-rolling annealing on the bond strength was evaluated in order to achieve the optimum parameter in rolling Al/Cu/Ni composites. So, after preparing samples, using peeling test, we investigated the bond strength of Al-Cu strips. The results showed that coating copper with nickel reduces the bond strength of Al-Cu strips. However, by increasing the thickness of coating, the bond strength was increased, reaching the highest level compared with the strips without coating. Also, the increase in the reduction enhanced the bond strength of the layered strips. Yet, a decrease in bond strength was achieved by post-rolling annealing of the layered strips. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：212 / 220

页数：9

共 30 条

[1] Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process [J].

Abbasi, M ;

Taheri, AK ;

Salehi, MT .

JOURNAL OF ALLOYS AND COMPOUNDS, 2001, 319 (1-2) :233-241

[2] Effects of processing parameters on the bond strength of Cu/Cu roll-bonded strips [J].

Abbasi, Mohsen ;

Toroghinejad, Mohammad Reza .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (03) :560-563

[3] Study on the effect of presence of TiH2 particles on the roll bonding behavior of aluminum alloy strips [J].

Alizadeh, M. ;

Paydar, M. H. .

MATERIALS & DESIGN, 2009, 30 (01) :82-86

[4]

*ASTM, 2001, D1876 ASTM

[5]

Chawla N., 2006, Metal matrix composites

[6] Investigation of structure and mechanical properties of multi-layered Al/Cu composite produced by accumulative roll bonding (ARB) process [J].

Eizadjou, M. ;

Talachi, A. Kazemi ;

Manesh, H. Danesh ;

Shahabi, H. Shakur ;

Janghorban, K. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (09) :2003-2009

[7] Investigation of roll bonding between aluminum alloy strips [J].

Eizadjou, M. ;

Manesh, H. Danesh ;

Janghorban, K. .

MATERIALS & DESIGN, 2008, 29 (04) :909-913

[8] Mechanism of warm and cold roll bonding of aluminum alloy strips [J].

Eizadjou, M. ;

Manesh, H. Danesh ;

Janghorban, K. .

MATERIALS & DESIGN, 2009, 30 (10) :4156-4161

[9]

Granjun H., 1991, FUNDAMENTAL WELDING

[10] Interfacial strength development of roll-bonded aluminium/copper metal laminates [J].

Heness, G. ;

Wuhrer, R. ;

Yeung, W. Y. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 (740-742) :740-742

← 1 2 3 →