Use of Slag from the Combustion of Solid Municipal Waste as A Partial Replacement of Cement in Mortar and Concrete

被引:24
作者
Czop, Monika [1 ]
Lazniewska-Piekarczyk, Beata [2 ]
机构
[1] Silesian Tech Univ, Fac Energy & Environm Engn, Dept Technol & Installat Waste Management, Konarskiego 18, PL-44100 Gliwice, Poland
[2] Silesian Tech Univ, Fac Civil Engn, Dept Bldg Engn & Bldg Phys, Akad 5, PL-44100 Gliwice, Poland
关键词
municipal solid waste minimization; incineration; circular economy; slag; addition; cement; mortar; concrete; INCINERATOR BOTTOM ASH; MSWI; AGGREGATE; RESIDUES;
D O I
10.3390/ma13071593
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In Europe, the use of wastes in the cement and construction industry follows the assumptions of sustainability and the idea of circular economy. At present, it is observed that cement plants introduce wastes to the cement in the form of so-called mineral additives. The most often used mineral additives are: fly ash with silica fume, granulated blast furnace slag and silica fume. The use of mineral additives in the cement is related to the fact that the use of the most expensive component of cement-Portland cement clinker-is limited. The purpose of the article is a preliminary evaluation of the suitability of slag from the municipal solid waste incineration plant for its use as a replacement of cement. In this article, slag from the municipal solid waste incineration (MSWI) replaces cement in the quantity of 30%, and presents the content of oxides and elements of slag from the MSWI. The obtained results are compared to the requirements that the crushed and granulated blast furnace slag need to meet to be suitable for use as an additive of type II to the concrete. The conducted analyses confirmed that the tested slag meets the requirements for the granulated blast furnace slag as an additive to the concrete in the following parameters: CaO <= 18.0%, SO3 <= 2.5% and Cl <= 0.1%. At the same time, mechanical features were tested of the designed mortars which consisted of a mixture of Portland cement (CEM I) with 30% of slag admixture. The designed mortar after 28 days of maturing reached a compressive strength of 32.0 MPa, and bending strength of 4.0 MPa. When compared to the milled granulated blast furnace slag (GBFS), the obtained values are slightly lower. Furthermore, the hardened mortars were subject to a leachability test to check the impact on the environment. Test results showed that the aqueous extracts from mixtures with 30% of slag admixtures slightly exceed the limits and do not pose a sufficiant threat to the environment as to eliminate the MSWI slag from economical use.
引用
收藏
页数:20
相关论文
共 40 条
[1]   Global CO2 emissions from cement production [J].
Andrew, Robbie M. .
EARTH SYSTEM SCIENCE DATA, 2018, 10 (01) :195-217
[2]  
[Anonymous], 2011, 154072011 EN CEN
[3]  
[Anonymous], 1993, Z15008021993 PN
[4]  
[Anonymous], 2000, 109732000 EN CEN
[5]  
[Anonymous], 2002, 92802002 PNISO
[6]  
[Anonymous], 2000, 5872000 ENISO
[7]  
[Anonymous], 2016, 19632016 EN CEN
[8]  
[Anonymous], 2001, ENZ1501132001 CEN
[9]  
[Anonymous], 2013, 15935201302 EN CEN
[10]  
[Anonymous], 2002, 1245722006 PNEN