Open Source Real-Time Control Software for the Kuka Light Weight Robot

被引：10

作者：

Schoepfer, Matthias ^{[1
]}

Schmidt, Florian ^{[1
]}

Pardowitz, Michael ^{[1
]}

Ritter, Helge ^{[1
]}

机构：

[1] Univ Bielefeld, Neuroinformat Grp, Fac Technol, Bielefeld, Germany

来源：

2010 8TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA) | 2010年

关键词：

Robots; Manipulators; Control systems;

D O I：

10.1109/WCICA.2010.5553773

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

The Kuka lightweight robot offers unique features to researchers. Besides its 7 Degrees of Freedom (DOF), also torque sensing in every joint and a variety of compliance modes make the robot a good choice for robotic research. Unfortunately the interface to control the robot externally has its restrictions. In this paper, we present an open source solution (OpenKC) that will allow the control of the robot externally using a simple set of routines that can easily be integrated in existing software. All features and modes of the Kuka light weight robot can be used and triggered externally. Simultaneous control of several robots is explicitly supported. The software has proven its use in several applications.

引用

页码：444 / 449

页数：6

共 50 条

[41] HCCI engine Modeling for real-time implementation and control development [J].

Jia, Nan ;

Wang, Jihong ;

Nuttall, Keith ;

Wei, Jianlin ;

Xu, Hongming ;

Wyszynski, M. L. ;

Qiao, Jun ;

Richardson, Michael J. .

IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2007, 12 (06) :581-589

[42] Predictive-Delay Control for Overloading in Real-Time Scheduling [J].

Sahraoui, Zakaria ;

Labed, Abdenour ;

Ahmed-Nacer, Mohamed ;

Grolleau, Emmanuel .

SIMULATION AND MODELING METHODOLOGIES, TECHNOLOGIES AND APPLICATIONS, SIMULTECH 2016, 2018, 676 :154-170

[43] Computer architectures for real-time knowledge-based control [J].

Eldeib, Hany K., 1600,

[44] Robot-Assisted Disassembly Sequence Planning With Real-Time Human Motion Prediction [J].

Lee, Meng-Lun ;

Liu, Wansong ;

Behdad, Sara ;

Liang, Xiao ;

Zheng, Minghui .

IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS, 2023, 53 (01) :438-450

[45] Dynamic Optimality in Real-Time: A Learning Framework for Near-Optimal Robot Motions [J].

Weitschat, Roman ;

Haddadin, Sami ;

Huber, Felix ;

Albu-Schaeffer, Alin .

2013 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), 2013, :5636-5643

[46] FoReCo: A Forecast-Based Recovery Mechanism for Real-Time Remote Control of Robotic Manipulators [J].

Groshev, Milan ;

Martin-Perez, Jorge ;

Guimaraes, Carlos ;

de la Oliva, Antonio ;

Bernardos, Carlos J. .

IEEE TRANSACTIONS ON NETWORK AND SERVICE MANAGEMENT, 2022, 19 (03) :2573-2586

[47] Predictive compensation of time-varying computing delay on real-time control systems [J].

Ovaska, SJ ;

Vainio, O .

IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 1997, 5 (05) :523-526

[48] Applying load adaptive real-time algorithms to a vehicle control system [J].

Pfefferl, J ;

Farber, G .

CONTROL ENGINEERING PRACTICE, 1998, 6 (04) :541-546

[49] Real-Time Planning and Nonlinear Control for Quadrupedal Locomotion With Articulated Tails [J].

Fawcett, Randall T. ;

Pandala, Abhishek ;

Kim, Jeeseop ;

Hamed, Kaveh Akbari .

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2021, 143 (07)

[50] Real-Time Gain Control of PET Detectors and Evaluation With Challenging Radionuclides [J].

Jansen, Floris P. ;

Deller, Timothy W. ;

Fries, Mark D. ;

Khalighi, Mohammad Mehdi ;

White, Sharon L. ;

Radford, Lauren L. ;

McConathy, Jonathan E. ;

Lapi, Suzanne E. .

IEEE TRANSACTIONS ON MEDICAL IMAGING, 2021, 40 (01) :71-80

← 1 2 3 4 5 →