Effect of Sintering Temperature on Microstructure and Mechanical Properties of Al2O3/TiAl In Situ Composites

被引：0

作者：

Xiang, Liuyi ^{[1
]}

Wang, Fen ^{[1
]}

Zhu, Jianfeng ^{[1
]}

Wang, Xiaofeng ^{[1
]}

机构：

[1] Shaanxi Univ Sci & Technol, Minist Educ, Key Lab Auxiliary Chem & Technol Chem Ind, Xian 710021, Peoples R China

来源：

ECO-MATERIALS PROCESSING AND DESIGN XII | 2011年 / 695卷

关键词：

Al2O3/TiAl composites; sintering temperature; Microstructure; Mechanical properties; TIAL-TI5SI3; ALLOYS;

D O I：

10.4028/www.scientific.net/MSF.695.227

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Al2O3/TiAl composites were successfully fabricated by hot-press-assisted exothermic dispersion method with powder mixtures of Ti, Al, TiO2 and Cr2O3 as raw materials. The effect of sintering temperature on the microstructures and mechanical properties of Al2O3/TiAl composites has been investigated. The results show that the Rockwell hardness and density of the composites increased with increasing sintering temperature. But the flexural strength and fracture toughness peaked at 825 MPa and 7.29 MPa.m(1/2), respectively, when the sintering temperature reached to 1300 degrees C.

引用

页码：227 / 230

页数：4

共 14 条

[1] Reactive sintering of TiAl-Ti5Si3 in situ composites [J].

Alman, DE .

INTERMETALLICS, 2005, 13 (06) :572-579

[2] Sintering behaviour and microstructures of Ti(Al,O)/Al2O3, Ti3Al(O)/Al2O3 and TiAl(O)/Al2O3 in situ composites [J].

Cai, ZH ;

Zhang, DL .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 419 (1-2) :310-317

[3] In situ processing of dense Al2O3-Ti aluminide interpenetrating phase composites [J].

Horvitz, D ;

Gotman, I ;

Gutmanas, EY ;

Claussen, N .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (06) :947-954

[4] Alloy design concepts for refined gamma titanium aluminide based alloys [J].

Imayev, R. M. ;

Imayev, V. M. ;

Oehring, M. ;

Appel, F. .

INTERMETALLICS, 2007, 15 (04) :451-460

[5] Sulfidation properties of TiAl-2 at.% X (X = V, Fe, Co, Cu, Nb, Mo, Ag and W) alloys at 1173 K and 1.3 Pa sulfur pressure in an H2S-H2 gas mixture [J].

Izumi, T ;

Yoshioka, T ;

Hayashi, S ;

Narita, T .

INTERMETALLICS, 2000, 8 (08) :891-901

[6] Intermetallics: Why is it so difficult to introduce them in gas turbine engines? [J].

Lasalmonie, Alain .

INTERMETALLICS, 2006, 14 (10-11) :1123-1129

[7] Microstructural characterization and mechanical properties of TiAl-Al2Ti4C2-Al2O3-TiC in situ composites by hot-press-aided reaction synthesis [J].

Peng, LM ;

Li, Z ;

Li, H ;

Wang, JH ;

Gong, M .

JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 414 (1-2) :100-106

[8] Multiphase intermetallic alloys for structural applications [J].

Sauthoff, G .

INTERMETALLICS, 2000, 8 (9-11) :1101-1109

[9] Synthesis of in-situ NiAl-Al2O3 nanocomposite by reactive milling and subsequent heat treatment [J].

Udhayabanu, V. ;

Ravi, K. R. ;

Vinod, V. ;

Murty, B. S. .

INTERMETALLICS, 2010, 18 (03) :353-358

[10]

Wang F., 2006, ACTA METALL SIN, V19, P432, DOI DOI 10.1016/S1006-7191(06)62084-X

← 1 2 →