A Boost PFC Rectifier with a Passive Lossless Snubber Circuit Using Coupled Inductors Methodes

被引:0
作者
Yun, Hyeok-Jin [1 ]
Kim, Jong-Hyun [1 ]
Ryu, Myung-Hyo [1 ]
Kim, Hee-Je [2 ]
机构
[1] KERI, HVDC Res Div, Power Convers & Control Res Ctr, Chang Won, South Korea
[2] Pusan Natl Univ, Dept Elect Engn, Jangjeon Dong, South Korea
来源
INTELLIGENT ROBOTICS AND APPLICATIONS, PT II | 2013年 / 8103卷
关键词
PFC; lossless snubber; boost;
D O I
暂无
中图分类号
TP18 [人工智能理论];
学科分类号
081104 ; 0812 ; 0835 ; 1405 ;
摘要
In this paper, a boost PFC rectifier with a novel passive lossless snubber circuit is proposed to minimize switching loss in high power applications. A new turn-on mechanism of the lossless snubber using coupled inductor is applied to reduce the reverse recovery loss of the output diode rectifier. The turn-off operation of the lossless snubber is composed of a single capacitor and two diodes to reduce the voltage stress and the power loss at the turn-off of the switch. Due to the lossless clamping operation, the proposed PFC operates under soft switching conditions with high power conversion efficiency. The design and performance of the boost PFC rectifier using the proposed lossless snubber are verified by experimental results using a 3.3kW prototype rectifier.
引用
收藏
页码:334 / 337
页数:4
相关论文
共 6 条
[1]   A simple passive ZCS circuit for PFC converter [J].
Hwu, K. I. ;
Tsai, Chien-Li ;
Lin, Kuo-Fan .
APEC 2008: TWENTY-THIRD ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1-4, 2008, :1022-+
[2]  
Joung GB, 2002, IEEE POWER ELECTRON, P938, DOI 10.1109/PSEC.2002.1022575
[3]   A novel active snubber for high-power boost converters [J].
Jovanovic, MM ;
Jang, YT .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2000, 15 (02) :278-284
[4]   Passive Lossless Snubber for Boost PFC With Minimum Voltage and Current Stress [J].
Li, River T. H. ;
Chung, Henry Shu-Hung ;
Sung, Anson K. T. .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2010, 25 (03) :602-613
[5]  
Schenk K., 2007, Non dissipative snubber circuit with saturable reactor. U.S. Patent, Patent No. [7 233 507, 7233507]
[6]  
Shi-gong Jiang, 2009, 2009 IEEE Vehicle Power and Propulsion Conference (VPPC), P1461, DOI 10.1109/VPPC.2009.5289522