Innovative liquid cooling configuration for high heat flux applications

Breakthroughs in the recent cutting-edge technologies have become increasingly dependent on the ability to safely dissipate large amount of heat from small areas. Improvements in cooling techniques are therefore required to avoid unacceptable temperature rise and at the same time maintain a high efficiency. Jet impingement is one such cooling scheme which has been widely used to dissipate transient and steady concentrated heat loads. But with constantly increasing cooling needs, conventional jet impingement cooling is no longer a viable option. Considerable improvements are therefore required to meets such stringent requirements. A combination of swirl-impingement-fin generating geometry is one such alternative. Even without a fin, an overall enhancement of 150% - 200% in the maximum heat transfer coefficient has been recorded both experimentally and computationally due to impingement and associated swirl. Moreover, the presence of fins further increases the cooling area. The present scheme is therefore expected to overcome the existing heat distribution and cooling problems in high heat flux dissipating devices.