Research on Binderless Tungsten Carbide Prepared by Spark Plasma Sintering

被引：7
作者：
Li, Xiaoqiang [1 ]
Xiao, Zhangyi [1 ]
Yang, Chao [1 ]
Qu, Shengguan [1 ]
机构：
[1] S China Univ Technol, Sch Mech & Automot Engn, Guangzhou 510640, Guangdong, Peoples R China
来源：
ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2 | 2011年 / 37-38卷
关键词：
Pure WC powders; Particle size; Spark plasma sintering; GROWTH;
D O I：
10.4028/www.scientific.net/AMM.37-38.980
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Commerical pure WC powders of 0.2, 0.4, 0.8, 2.0 and 3.0 mu m in diameter were sintered by spark plasma sintering process at 1300 degrees C, respectively. By analyzing the XRD patterns of the initial powders and the microstructure of the sintered samples, it is affirmed that the powders with an average size of 0.8 pm exhibits the best activity and sintering property. To optimize sintering temperature, the sintering of 0.8 mu m powders was carried out at 1200-1700 degrees C. The specimen sintered at 1300 degrees C has a density of 15.49 g/cm(3) and an average grain size of about 0.7 mu m, and exhibits the most excellent mechanical properties. The corresponding Vickers hardness and transverse rupture strength are 2469 HV and 1656 MPa, respectively.
引用
收藏
页码：980 / 984
页数：5
相关论文
共 50 条
[31]   Additive manufacturing-assisted sintering: Low pressure, low temperature spark plasma sintering of tungsten carbide complex shapes [J].
Grippi, Thomas ;
Torresani, Elisa ;
Maximenko, Andrii L. ;
Olevsky, Eugene A. .
CERAMICS INTERNATIONAL, 2024, 50 (19) :37228-37240
[32]   Phase Composition and Microstructure of Binderless WC-ZrC Cemented Carbides Fabricated by Spark Plasma Sintering [J].
Ren, Xiaoyong ;
Peng, Zhijian ;
Rong, Huiyong ;
Peng, Ying ;
Wang, Chengbiao ;
Fu, Zhiqiang ;
Qi, Longhao ;
Miao, Hezhuo .
HIGH-PERFORMANCE CERAMICS VIII, 2014, 602-603 :556-560
[33]   Microstructure and bubble formation of Al-K-Si doped tungsten prepared by spark plasma sintering [J].
Huang, Bo ;
He, Bo ;
Xiao, Ye ;
Ang, Ran ;
Yang, Jijun ;
Liao, Jiali ;
Yang, Yuanyou ;
Liu, Ning ;
Pan, Deng ;
Tang, Jun .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2016, 54 :335-341
[34]   Spark plasma sintering of pure and doped tungsten as plasma facing material [J].
Autissier, E. ;
Richou, M. ;
Minier, L. ;
Naimi, F. ;
Pintsuk, G. ;
Bernard, F. .
PHYSICA SCRIPTA, 2014, T159
[35]   EFFECTS OF TRANSITION METAL CARBIDES ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ULTRAFINE TUNGSTEN CARBIDE VIA SPARK PLASMA SINTERING [J].
Lee, Jeong-Han ;
Ik-Hyun-Oh ;
Hyun-Kuk-Park .
ARCHIVES OF METALLURGY AND MATERIALS, 2021, 66 (04) :1029-1032
[36]   Activated sintering effect of Fe element on tungsten via spark plasma sintering [J].
Chen, Shuai ;
Jiang, Zhizhong ;
Huang, Jihua ;
Yang, Jian ;
Ye, Zheng .
NUCLEAR MATERIALS AND ENERGY, 2022, 32
[37]   Carbide layer coating on titanium by spark plasma sintering technique [J].
Nishimoto, Akio ;
Nishi, Chihiro .
SURFACE & COATINGS TECHNOLOGY, 2018, 353 :324-328
[38]   Preparation of superfine-cemented carbide by spark plasma sintering [J].
Xie Y. ;
Wang X. ;
Chen L. ;
Li X. ;
Guo H. .
J Wuhan Univ Technol Mater Sci Ed, 2006, 1 (42-45) :42-45
[39]   Preparation of superfine-cemented carbide by spark plasma sintering [J].
Xie, YF ;
Wang, YQ ;
Chen, LD ;
Li, YD ;
Guo, HL .
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2006, 21 (01) :42-45
[40]   Preparation of Superfine-Cemented Carbide by Spark Plasma Sintering [J].
解迎芳 ;
王兴庆 .
Journal of Wuhan University of Technology(Materials Science Edition), 2006, (01) :42-45
12345