INVESTIGATION OF WEAR RESISTANCE OF SELECTED MATERIALS AFTER SLIDE BURNISHING PROCESS

被引：18

作者：

Dzierwa, Andrzej ^{[1
]}

Galda, Lidia ^{[1
]}

Tupaj, Miroslaw ^{[2
]}

Dudek, Kazimiera ^{[3
]}

机构：

[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Ul Powstancow Warszawy 8, PL-35959 Rzeszow, Poland

[2] Rzeszow Univ Technol, Fac Mech & Technol, Ul Kwiatkowskiego 4, PL-37450 Stalowa Wola, Poland

[3] Univ Rzeszow, Ctr Innovat Technol, Ul Pigonia 1, PL-35310 Rzeszow, Poland

来源：

EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY | 2020年 / 22卷 / 03期

关键词：

surface topography; friction; wear; RESIDUAL-STRESS PROFILE; SURFACE-ROUGHNESS; TRIBOLOGICAL PROPERTIES; BALL; PARAMETERS; FRICTION; HARDNESS; ROLLER; ENHANCEMENT; PRODUCTS;

D O I：

10.17531/ein.2020.3.5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The article presents the research on the impact of slide burnishing process carried out with use of various ceramics on friction and wear of steel elements. In addition, surfaces after grinding, lapping and polishing processes were tested. The tribological couple was made of steel discs, toughened to a hardness of 40 +/- 2 HRC, and balls made of 100Cr6 steel with a hardness of 62 HRC. The tests were carried out at three sliding speeds: 0.16 m/s, 0.32 m / s and 0.48 m/s. The research proved the possibility of improving selected tribological properties of friction pairs thanks to the use of slide burnishing process and also allowed to establish a number of relationships between the parameters characterizing the surface topography and the tribological parameters.

引用

页码：432 / 439

页数：8

共 40 条

[1]

[Anonymous], 2517822012 PNEN ISO

[2]

[Anonymous], 2005, DETERMINATION RESIDU

[3]

[Anonymous], 4516204 PNEN ISO

[4]

Bara M, 2008, EKSPLOAT NIEZAWODN, P66

[5]

Brzózka K, 2013, NUKLEONIKA, V58, P99

[6] Influence of ball burnishing on residual stress profile of a 15-5PH stainless steel [J].

Chomienne, V. ;

Valiorgue, F. ;

Rech, J. ;

Verdu, C. .

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2016, 13 :90-96

[7] Influence of Ball-Burnishing Process on Surface Topography Parameters and Tribological Properties of Hardened Steel [J].

Dzierwa, Andrzej ;

Markopoulos, Angelos P. .

MACHINES, 2019, 7 (01)

[8] The effect of ceramic tribo-elements on friction and wear of smooth steel surfaces [J].

Dzierwa, Andrzej ;

Pawlus, Pawel ;

Reizer, Rafal .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2019, 233 (03) :456-465

[9] Enhancement of surface quality and tribological properties using ball burnishing process [J].

El-Tayeb, N. S. M. ;

Low, K. O. ;

Brevern, P. V. .

MACHINING SCIENCE AND TECHNOLOGY, 2008, 12 (02) :234-248

[10]

El-Tayeb NSM., 1994, Frictional Behaviour of Burnished Copper Surfaces under Dry Contact Conditions, P171

← 1 2 3 4 →