Phase equilibria of the Sn-Sb binary system

被引:100
作者
Chen, Sinn-Wen [1 ]
Chen, Chih-Chi [1 ]
Gierlotka, Wojcieh [1 ,2 ]
Zi, An-Ren [1 ]
Chen, Po-Yin [1 ]
Wu, Hsin-Jay [1 ]
机构
[1] Natl Tsing Hua Univ, Dept Chem Engn, Hsinchu 300, Taiwan
[2] AGH Univ Sci & Technol, Non Ferrous Metals Dept, PL-30059 Krakow, Poland
关键词
Sn; Sb; DTA; CALPHAD; thermodynamics;
D O I
10.1007/s11664-008-0464-x
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Sn-Sb alloys are important high-temperature solders. However, inconsistencies are found in the available phase diagrams, and some phase boundaries in the Sn-Sb system have not been determined. Sn-Sb alloys were prepared, equilibrated at 160 degrees C to 300 degrees C, and the equilibrium phases and their compositions were determined. The beta-SnSb phase has a very wide compositional homogeneity range, and its composition varies from Sn-47.0at.%Sb to Sn-62.8at.%Sb. There is no order-disorder transformation of the beta-SnSb phase. There are three peritectic reactions in the Sn-Sb system, L + Sb = beta-SnSb, L + beta-SnSb = Sn(3)Sb(2), and L + Sn(3)Sb(2) = Sn, and their temperatures are 424 degrees C, 323 degrees C, and 243 degrees C, respectively. Thermodynamic models of the Sn-Sb binary system were developed using the CALPHAD approach based on the experimental results of this study and the data in the literature. The calculated phase diagram and thermodynamic properties are in good agreement with the experimental determinations.
引用
收藏
页码:992 / 1002
页数:11
相关论文
共 43 条
  • [1] Alen W.P., 1990, SCRIPTA METALL MATER, V24, P2215, DOI DOI 10.1016/0956-716X(90)90513-G
  • [2] [Anonymous], 1991, PURE 4 4 SGTE PUR EL
  • [3] AZZAOUI M, 1993, Z METALLKD, V84, P545
  • [4] Blondel R, 1935, CR HEBD ACAD SCI, V200, P1472
  • [5] BOETINGER WJ, 2006, DTA HEAT FLUX MEASUR
  • [6] BOWEN EG, 1935, PHILOS MAG, V20, P913
  • [7] CHEN P, 2007, UNPUB
  • [8] Lowering of Sn-Sb alloy melting points caused by substrate dissolution
    Chen, Sinn-Wen
    Chen, Po-Yin
    Wang, Chao-Hong
    [J]. JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (11) : 1982 - 1985
  • [9] Determination of the melting and solidification characteristics of solders using differential scanning calorimetry
    Chen, SW
    Lin, CC
    Chen, CM
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (07): : 1965 - 1972
  • [10] THE RELATIONSHIP BETWEEN THE PEAK SHAPE OF A DTA CURVE AND THE SHAPE OF A PHASE-DIAGRAM
    CHEN, SW
    HUANG, CC
    LIN, JC
    [J]. CHEMICAL ENGINEERING SCIENCE, 1995, 50 (03) : 417 - 431