Simultaneous actuation and displacement sensing for electrostatic drives

This paper presents a method for driving a MEMS electrostatic actuator, while simultaneously sensing the resulting displacement/capacitance without the use of an additional physical sensing structure. The approach superposes the sensing and actuation signals into a single input into the system and obtains its mechanical (displacement) response from the modulation (amplitude or phase) it produces on the sensing input. The approach is analyzed and experimentally shown to produce an amplitude modulation of 0.1857 mV mu m(-1) of displacement on electrostatic drive that produces a displacement of 14 mu m at 100 V and a 0.55 pF capacitance change from a nominal capacitance of 0.35 Pico farads. The approach enables a very cost-effective and convenient approach to detect the displacement of MEMS devices for a variety of applications in the laboratory environment, and provide a potential feedback signal for closed-loop control of electrostatically driven MEMS devices.