Cyclic compression behavior of a Cu-Zr-Al-Ag bulk metallic glass

被引：26

作者：

Freels, M. ^{[1
]}

Wang, G. Y. ^{[1
]}

Zhang, W. ^{[2
]}

Liaw, P. K. ^{[1
]}

Inoue, A. ^{[2
]}

机构：

[1] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA

[2] Tohoku Univ, Inst Mat Res, Sendai, Miyagi 9808577, Japan

来源：

INTERMETALLICS | 2011年 / 19卷 / 08期

基金：

美国国家科学基金会;

关键词：

Fatigue resistance and crack growth; Fracture mode; Fracture stress; Glasses; metallic; Mechanical properties at ambient temperature; FATIGUE-ENDURANCE LIMIT; MECHANICAL-PROPERTIES; FRACTURE MECHANISMS; CRACK PROPAGATION; YIELD CRITERION; DEFORMATION; PLASTICITY; TENSILE; ALLOY;

D O I：

10.1016/j.intermet.2011.03.023

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The cyclic compression behavior of a Cu(45)Zr(45)Al(5)Ag(5)BMG was investigated in order to elucidate the damage initiation and growth mechanisms. The present Cu45Zr45Al5Ag5 BMG was found to have a fatigue-endurance limit of 1418 MPa and fatigue ratio of 0.77. Fracture under cyclic compression occurred in a pure shear mode. The fracture surface forms an angle of 41 degrees with respect to the loading axis. This angle was similar to the monotonic compressive fracture angle for the present BMG. The cyclic compression fracture surface displays a morphology nearly identical to the monotonic compression fracture surface. In addition to many shear bands and cracks, areas of "chipping" were commonly found on the outside surfaces of the fatigue specimens. An attempt was made to measure crack growth rates, and two types of crack growth behavior were found. With the first type, the growth rate decreased with cycles due to the decrease in the driving force for crack propagation. With the second type, the crack growth rate increased with cycles after chipped areas developed. The fatigue deformation process for BMGs under cyclic compression was carefully studied and rationalized. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：1174 / 1183

页数：10

共 52 条

[21] Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass [J].

Mukai, T ;

Nieh, TG ;

Kawamura, Y ;

Inoue, A ;

Higashi, K .

INTERMETALLICS, 2002, 10 (11-12) :1071-1077

[22] Martensite formation in a ductile Cu47.5Zr47.5Al5 bulk metallic glass composite [J].

Pauly, Simon ;

Das, Jayanta ;

Duhamel, Cecile ;

Eckert, Juergen .

ADVANCED ENGINEERING MATERIALS, 2007, 9 (06) :487-491

[23] Fatigue behavior of Zr52.5Al10Ti5Cu17.9Ni14.6 bulk metallic glass [J].

Peter, WH ;

Liaw, PK ;

Buchanan, RA ;

Liu, CT ;

Brooks, CR ;

Horton, JA ;

Carmichael, CA ;

Wright, JL .

INTERMETALLICS, 2002, 10 (11-12) :1125-1129

[24] Fatigue behaviors of the Cu47.5Zr47.5Al5 bulk-metallic glass (BMG) and Cu47.5Zr38Hf9.5Al5BMG composite [J].

Qiao, D. C. ;

Fan, G. J. ;

Liaw, P. K. ;

Choo, H. .

INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (12) :2149-2154

[25]

Qiao DC, 2007, J MATER RES, V22, P544, DOI 10.1557/JMR.2007.0047

[26] Compression-compression fatigue and fracture behaviors of Zr50Al10CU37Pd3 bulk-metallic glass [J].

Qiao, Dongchun ;

Wang, Gongyao ;

Jiang, Wenhui ;

Yokoyama, Y. ;

Liaw, Peter K. ;

Choo, Hann .

MATERIALS TRANSACTIONS, 2007, 48 (07) :1828-1833

[27]

Schijve J., 2009, Fatigue of Structures and Materials II, DOI DOI 10.1007/978-1-4020-6808-9

[28] Atomistic basis for the plastic yield criterion of metallic glass [J].

Schuh, CA ;

Lund, AC .

NATURE MATERIALS, 2003, 2 (07) :449-452

[29] Overview No.144 - Mechanical behavior of amorphous alloys [J].

Schuh, Christopher A. ;

Hufnagel, Todd C. ;

Ramamurty, Upadrasta .

ACTA MATERIALIA, 2007, 55 (12) :4067-4109

[30] MICROSCOPIC MECHANISM FOR STEADY-STATE INHOMOGENEOUS FLOW IN METALLIC GLASSES [J].

SPAEPEN, F .

ACTA METALLURGICA, 1977, 25 (04) :407-415

← 1 2 3 4 5 6 →