Microstructure and strength development of fly ash-based geopolymer mortar: Role of nano-metakaolin

被引：67

作者：

Kaur, Mandeep ^{[1
]}

Singh, Jaspal ^{[1
]}

Kaur, Manpreet ^{[1
]}

机构：

[1] Punjab Agr Univ, Dept Civil Engn, Ludhiana, Punjab, India

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2018年 / 190卷

关键词：

Geopolymer mortar; Environmental safety; Compressive strength; Nano-metakaolin; Scanning electron microscopy; TEMPERATURE; SILICA; DURABILITY;

D O I：

10.1016/j.conbuildmat.2018.09.157

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Geopolymer mortar is a novel binder material that exhibits the same properties as of cement. However, being a waste material geopolymer binder has an edge over cement binder because of environmental safety. This paper elucidates the fluctuations in compressive strength and microstructure of fly ash based geopolymer mortar using 14 M molar concentrations of alkali activator solution along with different replacement levels of nano-metakaolin (0%, 2%, 4%, 6%, 8% and 10% of fly ash). The mixture of sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) in the ratio of 1:2.5 was used as an alkaline activator solution. All the specimens were cured for 24 h temperature curing and tested after 3,7,14 and 28 days of ambient curing followed to temperature curing. Geopolymer mortar with 4% nano-metakaolin shows appreciable improvement in compressive strength at all curing ages. The phase composition and microstructure of fly ash based geopolymer incorporated with nano-metakaolin were investigated using scanning electron microscope (SEM) technique. (C) 2018 Elsevier Ltd. All rights reserved.

引用

页码：672 / 679

页数：8

共 50 条

[31] Orthogonal analysis and mechanism of compressive strength and microstructure of the metakaolin-fly ash geopolymer
Yuan, Long
Ma, Yichao
Zhang, Jian
Men, Jiahui
Sun, Tao
Zhao, Hongche
Wu, Hao
Wang, Hongguang
Dai, Shoushuai
CASE STUDIES IN CONSTRUCTION MATERIALS, 2022, 17
[32] Macroscopic and microscopic analyses on mechanical performance of metakaolin/fly ash based geopolymer mortar
Zhang, Peng
Wang, Kexun
Wang, Juan
Guo, Jinjun
Ling, Yifeng
JOURNAL OF CLEANER PRODUCTION, 2021, 294
[33] Experimental assessment and optimization of mix parameters of fly ash-based lightweight geopolymer mortar with respect to shrinkage and strength
Mermerdas, K.
Algin, Z.
Ekmen, S.
JOURNAL OF BUILDING ENGINEERING, 2020, 31
[34] Influence of partial substitution of metakaolin by palm oil fuel ash and alumina waste ash on compressive strength and microstructure in metakaolin-based geopolymer mortar
Chub-Uppakarn, Tanan
Chompoorat, Thanakorn
Thepumong, Thanakit
Sae-Long, Worathep
Khamplod, Anupong
Chaiprapat, Sumate
CASE STUDIES IN CONSTRUCTION MATERIALS, 2023, 19
[35] The transition of fly ash-based geopolymer gels into ordered structures and the effect on the compressive strength
Ma, Xue
Zhang, Zuhua
Wang, Aiguo
CONSTRUCTION AND BUILDING MATERIALS, 2016, 104 : 25 - 33
[36] Water absorption and compressive strength of various coal fly ash-based geopolymer pastes
Chindawong, Chakkresit
Damrongwiriyanupap, Nattapong
Dimitrios, Panias
Pimraksa, Kedsarin
Setthaya, Naruemon
ADVANCES IN CEMENT RESEARCH, 2022, 34 (03) : 120 - 129
[37] Optimization of Alkaline Activator/fly ASH Ratio on The Compressive Strength of Manufacturing Fly ASH-BASED Geopolymer
Al Bakri, A. M. Mustafa
Kamarudin, H.
Karem, Omar A. K. A.
Ruzaidi, C. M.
Rafiza, A. R.
Norazian, M. N.
MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 734 - +
[38] Development of a high strength fly ash-based geopolymer in short time by using microwave curing
Graytee, Ahmed
Sanjayan, Jay G.
Nazari, Ali
CERAMICS INTERNATIONAL, 2018, 44 (07) : 8216 - 8222
[39] Factors Influencing the Long-Term Properties of Fly Ash-Based Geopolymer Mortar
Duong, N. A.
Skvara, F.
ADVANCES IN CIVIL ENGINEERING MATERIALS, 2016, 5 (01): : 212 - 234
[40] The effect of high temperature on the design of blast furnace slag and coarse fly ash-based geopolymer mortar
Kurklu, Gokhan
COMPOSITES PART B-ENGINEERING, 2016, 92 : 9 - 18

← 1 2 3 4 5 →