Microstructure, Texture, and Mechanical Properties of β Solution-Treated and Aged Metastable β Titanium Alloy, Ti-5Al-5Mo-5V-3Cr

被引：12

作者：

Manda, Premkumar ^{[1
]}

Samudrala, Rama Manohar ^{[3
]}

Mohan, M. K. ^{[2
]}

Singh, A. K. ^{[1
]}

机构：

[1] Def Met Res Lab, Hyderabad 500058, Andhra Pradesh, India

[2] NITW, Dept Met Engn, Warangal 506004, Andhra Pradesh, India

[3] NITW, Warangal 506004, Andhra Pradesh, India

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2017年 / 48A卷 / 10期

关键词：

BEHAVIOR; ALPHA; PHASE; FLOW; TEMPERATURE; ANISOTROPY; EVOLUTION;

D O I：

10.1007/s11661-017-4217-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The current study describes the aging characteristics and mechanical properties of a metastable beta titanium alloy Ti-5Al-5Mo-5V-3Cr. The aged microstructures consist of fine alpha-phase precipitates (lath morphology) in equiaxed beta grains. The sizes of the alpha-phase precipitates increase with the increasing aging temperature. The beta ST WQ and 823 K (550 A degrees C)-aged material exhibits maximum hardness due to precipitation hardening. The low- and high-temperature aging conditions result in strong c-type basal and prismatic textures in the alpha-phase, respectively. The beta-phase of the alloy aged at low temperature reveals the presence of texture with moderate intensity. In contrast, high-temperature-aged material exhibits very strong beta-phase texture. The strengths of the alloy under beta ST WQ- and 923 K (650 A degrees C)-aged conditions are the maximum and minimum along TD and RD, while the ductility values are the maximum and minimum along the RD and TD direction samples, respectively. The flow curves follow typical Holloman equation along three sample directions, and the work hardening rate curves display two distinctive regimes, namely, stage I and stage II. The yield locus plots of the beta ST WQ and aged materials exhibit the presence of anisotropy.

引用

页码：4539 / 4552

页数：14

共 31 条

[11]

Humphreys F.J., 2005, RECRYSTALLIZATION RE

[12] The anisotropy and texture of Al-Li alloys [J].

Jata, KV ;

Hopkins, AK ;

Rioja, RJ .

ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 :647-652

[13] Thermomechanical processing of Ti-5A1-5Mo-5V-3Cr [J].

Jones, N. G. ;

Dashwood, R. J. ;

Dye, D. ;

Jackson, M. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 490 (1-2) :369-377

[14] The Flow Behavior and Microstructural Evolution of Ti-5Al-5Mo-5V-3Cr during Subtransus Isothermal Forging [J].

Jones, N. G. ;

Dashwood, R. J. ;

Dye, D. ;

Jackson, M. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (08) :1944-1954

[15] Development of chevron-shaped α precipitates in Ti-5Al-5Mo-5V-3Cr [J].

Jones, N. G. ;

Dasbwood, R. J. ;

Jackson, M. ;

Dye, D. .

SCRIPTA MATERIALIA, 2009, 60 (07) :571-573

[16] β Phase decomposition in Ti-5Al-5Mo-5V-3Cr [J].

Jones, N. G. ;

Dashwood, R. J. ;

Jackson, M. ;

Dye, D. .

ACTA MATERIALIA, 2009, 57 (13) :3830-3839

[17] On the origin of the stress decrease for nickel polycrystals with few grains across the thickness [J].

Keller, C. ;

Hug, E. ;

Chateigner, D. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 500 (1-2) :207-215

[18]

Lagaree, 1989, PKSFA REG US PATENT

[19]

LEE D, 1967, T METALL SOC AIME, V239, P1476

[20] LATTICE PARAMETER OF BETA TITANIUM AT ROOM TEMPERATURE [J].

LEVINGER, BW .

JOURNAL OF METALS, 1953, 5 (02) :195-195

← 1 2 3 4 →