3-D Performance Analysis and Multiobjective Optimization of Coreless-Type PM Linear Synchronous Motors

被引:55
作者
Min, Seun Guy [1 ]
Sarlioglu, Bulent [1 ]
机构
[1] Univ Wisconsin, Dept Elect & Comp Engn, 1415 Johnson Dr, Madison, WI 53706 USA
关键词
Average magnetic field; coreless-type motor; differential evolution (DE); end effect; experiment; magnet linear synchronous motor; optimization; Pareto front; permanent thrust ripple; winding factor; PERMANENT-MAGNET MACHINES; DESIGN OPTIMIZATION; FIELD;
D O I
10.1109/TIE.2017.2745475
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper presents a three-dimensional (3-D) performance analysis and multiobjective design optimization of coreless-type permanent magnet linear synchronous motors. The average of open circuit magnetic field distribution is analytically predicted by solving two Laplace's equations. The winding factor calculation, which requires an approach different from conventional slotted motors, is provided to evaluate the motor performances. As a result, average thrust and thrust ripple can be obtained without loss of accuracy compared with results of 2-D finite element analysis (FEA). The 3-D leakage influences are subsequently incorporated into the analysis using lumped parameter magnetic circuit model because end effects are not neglected due to a relatively large air gap. Consequently, two meaningful contributions of this paper are summarized as follows: first, 3-D electromagnetic performances can be accurately predicted by the proposed analytical method. Second, with no need for the time-consuming 3-D FEA, differential evolution, a practical approach to global optimization, can simply be employed to search for solutions which belong to the Pareto optimal set. Finally, the validity of the analytical results is confirmed with the experimental results.
引用
收藏
页码:1855 / 1864
页数:10
相关论文
共 25 条
[11]  
Libert F., 2004, Proc. 16th International Conference on Electrical Machines, P530
[12]  
Lipo T.A., 2004, INTRO AC MACHINE DES
[13]  
Magnussen F, 2003, IEEE IEMDC'03: IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE, VOLS 1-3, P333, DOI 10.1109/IEMDC.2003.1211284
[14]   Differential-Evolution-Based Parameter Identification of a Line-Start IPM Synchronous Motor [J].
Marcic, Tine ;
Stumberger, Bojan ;
Stumberger, Gorazd .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (11) :5921-5929
[15]   Winding factor calculation for analysis of back EMF waveform in air-core permanent magnet linear synchronous motors [J].
Mohammadpour, A. ;
Gandhi, A. ;
Parsa, L. .
IET ELECTRIC POWER APPLICATIONS, 2012, 6 (05) :253-259
[16]   Analysis, Optimization, and Prototyping of a Brushless DC Limited-Angle Torque-Motor With Segmented Rotor Pole Tip Structure [J].
Nasiri-Zarandi, Reza ;
Mirsalim, Mojtaba ;
Cavagnino, Andrea .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2015, 62 (08) :4985-4993
[17]   Very-High-Speed Slotless Permanent-Magnet Motors: Analytical Modeling, Optimization, Design, and Torque Measurement Methods [J].
Pfister, Pierre-Daniel ;
Perriard, Yves .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2010, 57 (01) :296-303
[18]   An Improved Magnetic Equivalent Circuit Model for Iron-Core Linear Permanent-Magnet Synchronous Motors [J].
Sheikh-Ghalavand, B. ;
Vaez-Zadeh, S. ;
Isfahani, A. Hassanpour .
IEEE TRANSACTIONS ON MAGNETICS, 2010, 46 (01) :112-120
[19]  
Skaar S. E., 2006, P INT C EL MACH SEP
[20]   Design and Optimization of a Voice Coil Motor With a Rotary Actuator for an Ultrasound Scanner [J].
Smith, Kristopher J. ;
Graham, David J. ;
Neasham, Jeffrey A. .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2015, 62 (11) :7073-7078