Effects of Long-term Storage on the Mechanical Characteristics of Wood Plastic Composites Produced from Thermally Modified Wood Fibers

被引：9
|
作者：
Follrich, Juergen [1 ]
Mueller, Ulrich [1 ]
Gindl, Wolfgang [2 ]
Mundigler, Norbert [3 ]
机构：
[1] Wood K Plus Competence Ctr Wood Composites & Wood, A-4021 Linz, Austria
[2] BOKU Univ Nat Resources & Appl Life Sci, Dept Mat Sci & Proc Engn, Inst Wood Sci & Technol, Vienna, Austria
[3] BOKU Univ Nat Resources & Appl Life Sci, Dept Agrobiotechnol, Inst Nat Mat Technol, IFA Tulln, Vienna, Austria
来源：
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS | 2010年 / 23卷 / 06期
关键词：
long-term storage; mechanical properties; thermal treatment; wood plastic composites; CHEMICALLY-MODIFIED WOOD; BEHAVIOR; DEGRADATION; STRENGTH; FLOUR;
D O I：
10.1177/0892705710369042
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
In order to study possible changes in the mechanical properties of wood plastic composites produced from thermally modified wood fibers as reinforcement material (60%) and polypropylene (40%) after long-term storage under constant conditions, tensile and flexural specimens were tested in the years 2004 and 2009 after storage at 20 degrees C and 65% humidity. Increased tensile strength, Young's modulus (tensile test) as well as modulus of elasticity (flexural test) were observed for the long-term stored samples indicating a positive effect of the storage conditions on the mechanical properties of the samples.
引用
收藏
页码：845 / 853
页数：9
相关论文
共 50 条
  • [21] Effects of silane modified minerals on mechanical, microstructural, thermal, and rheological properties of wood plastic composites
    Koohestani, Babak
    Ganetri, Ikram
    Yilmaz, Erol
    COMPOSITES PART B-ENGINEERING, 2017, 111 : 103 - 111
  • [22] STUDY ON THE EFFECTS OF WOOD FLOUR GEOMETRY ON PHYSICAL AND MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITES
    Khonsari, Azar
    Taghiyari, Hamid R.
    Karimi, Ali
    Tajvidi, Mehdi
    MADERAS-CIENCIA Y TECNOLOGIA, 2015, 17 (03): : 545 - 558
  • [23] Luminescence of wood samples during long-term storage
    Puzyr, A. P.
    Medvedeva, S. E.
    MYCOSPHERE, 2016, 7 (06) : 716 - U200
  • [24] Wood particle size influence on water resistance and mechanical properties of thermally modified wood-poiypropylene composites
    Kuka, Edgars
    Cirule, Dace
    Kajaks, Janis
    Andersone, Ingeborga
    Andersons, Bruno
    INTERNATIONAL WOOD PRODUCTS JOURNAL, 2018, 9 (02) : 90 - 95
  • [25] Long-Term Creep Compliance of Wood Polymer Composites: Using Untreated Wood Fibers as a Filler in Recycled and Neat Polypropylene Matrix
    Bek, Marko
    Aulova, Alexandra
    Cresnar, Klementina Pusnik
    Matkovic, Sebastjan
    Kalin, Mitjan
    Perse, Lidija Slemenik
    POLYMERS, 2022, 14 (13)
  • [26] Effects of environmental conditions on physical and mechanical properties of thermally modified wood
    Cai, Chenyang
    Herajarvi, Henrik
    Haapala, Antti
    CANADIAN JOURNAL OF FOREST RESEARCH, 2019, 49 (11) : 1434 - 1440
  • [27] Some Properties of Wood Plastic Composites Produced from Waste Cups
    Tufan, Mursit
    Gulec, Turker
    Cukur, Ugur
    Akbas, Selcuk
    Imamoglu, Sami
    KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY, 2015, 15 (02): : 176 - 182
  • [28] Development of Wood Polymer Composites from Recycled Wood and Plastic Waste: Thermal and Mechanical Properties
    Nukala, Satya Guha
    Kong, Ing
    Kakarla, Akesh Babu
    Kong, Win
    Kong, Wei
    JOURNAL OF COMPOSITES SCIENCE, 2022, 6 (07):
  • [29] Effects of Antioxidants Content on the Physical and Mechanical Properties of Wood Plastic Composites
    Ab Ghani, Mohd Hafizuddin
    Ahmad, Sahrim
    COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 151 - 156
  • [30] Effects of nanoclay on physical and mechanical properties of wood-plastic composites
    Rangavar, Hossein
    Taghiyari, Hamid Reza
    Oromiehie, Abdulrasol
    Gholipour, Tahere
    Safarpour, Arsalan
    WOOD MATERIAL SCIENCE & ENGINEERING, 2017, 12 (04) : 211 - 219
12345