Effects of Long-term Storage on the Mechanical Characteristics of Wood Plastic Composites Produced from Thermally Modified Wood Fibers

被引：9
|
作者：
Follrich, Juergen [1 ]
Mueller, Ulrich [1 ]
Gindl, Wolfgang [2 ]
Mundigler, Norbert [3 ]
机构：
[1] Wood K Plus Competence Ctr Wood Composites & Wood, A-4021 Linz, Austria
[2] BOKU Univ Nat Resources & Appl Life Sci, Dept Mat Sci & Proc Engn, Inst Wood Sci & Technol, Vienna, Austria
[3] BOKU Univ Nat Resources & Appl Life Sci, Dept Agrobiotechnol, Inst Nat Mat Technol, IFA Tulln, Vienna, Austria
来源：
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS | 2010年 / 23卷 / 06期
关键词：
long-term storage; mechanical properties; thermal treatment; wood plastic composites; CHEMICALLY-MODIFIED WOOD; BEHAVIOR; DEGRADATION; STRENGTH; FLOUR;
D O I：
10.1177/0892705710369042
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
In order to study possible changes in the mechanical properties of wood plastic composites produced from thermally modified wood fibers as reinforcement material (60%) and polypropylene (40%) after long-term storage under constant conditions, tensile and flexural specimens were tested in the years 2004 and 2009 after storage at 20 degrees C and 65% humidity. Increased tensile strength, Young's modulus (tensile test) as well as modulus of elasticity (flexural test) were observed for the long-term stored samples indicating a positive effect of the storage conditions on the mechanical properties of the samples.
引用
收藏
页码：845 / 853
页数：9
相关论文
共 50 条
  • [1] Mechanical Properties and Morphology of Wood Plastic Composites Produced with Thermally Treated Beech Wood
    Arwinfar, Farhad
    Hosseinihashemi, Seyyed Khalil
    Latibari, Ahmad Jahan
    Lashgari, Amir
    Ayrilmis, Nadir
    BIORESOURCES, 2016, 11 (01): : 1494 - 1504
  • [2] Wood plastic composites made with thermally modified birch wood residues
    Kuka, E.
    Cirule, D.
    Kajaks, J.
    Andersone, I.
    Andersons, B.
    INTERNATIONAL WOOD PRODUCTS JOURNAL, 2016, 7 (04) : 225 - 230
  • [3] Long-term water absorption behavior of thermoplastic composites produced with thermally treated wood
    Hosseinihashemi, Seyyed Khalil
    Arwinfar, Farhad
    Najafi, Abdollah
    Nemli, Gokay
    Ayrilmis, Nadir
    MEASUREMENT, 2016, 86 : 202 - 208
  • [4] Long-term load effects for wood composites
    Karacabeyli, E
    35TH INTERNATIONAL PARTICLEBOARD/COMPOSITE MATERIALS SYMPOSIUM PROCEEDINGS, 2001, : 25 - 29
  • [5] Glassy state of wood polymers in native and thermally modified wood: effects on long-term material performance in service
    Willems, W.
    INTERNATIONAL WOOD PRODUCTS JOURNAL, 2016, 7 (02) : 71 - 75
  • [6] Long-term outdoor weathering evaluation of wood plastic composites
    Wei, Liqing
    Cappellazzi, Jed
    Manning, Mark
    McDonald, Armando G.
    Foster, Skyler
    Morrell, Jeffrey J.
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2022, 80 (01) : 23 - 34
  • [7] Long-term outdoor weathering evaluation of wood plastic composites
    Liqing Wei
    Jed Cappellazzi
    Mark Manning
    Armando G. McDonald
    Skyler Foster
    Jeffrey J. Morrell
    European Journal of Wood and Wood Products, 2022, 80 : 23 - 34
  • [8] Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites
    Bouafif, Hassine
    Koubaa, Ahmed
    Perre, Patrick
    Cloutier, Alain
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2009, 40 (12) : 1975 - 1981
  • [9] Effects of Premixing Wood Flour with Compatibilizer with Different Characteristics on the Physical and Mechanical Properties of Wood/Plastic Composites
    Murayama, Kazushige
    Kojima, Yoichi
    Kobori, Hikaru
    Aoki, Kenji
    Suzuki, Shigehiko
    Ito, Hirokazu
    Ogoe, Shinji
    Okamoto, Masaki
    Ema, Tomoyuki
    FOREST PRODUCTS JOURNAL, 2019, 69 (02) : 141 - 147
  • [10] Effects of the Size of Wood Flour on Mechanical Properties of Wood-Plastic Composites
    Huang, Haibing
    Du, Huhu
    Wang, Weihong
    Wang, Haigang
    BIOTECHNOLOGY, CHEMICAL AND MATERIALS ENGINEERING, PTS 1-3, 2012, 393-395 : 76 - 79
12345