Comparative study of perforated microcantilevers for MEMS applications

被引：0
|
作者：
Purohit, Soumya [1 ]
Pal, Prem [1 ]
Pandey, Ashok Kumar [2 ]
机构：
[1] Indian Inst Technol Hyderabad, Dept Phys, Sangareddy 502284, TS, India
[2] Indian Inst Technol Hyderabad, Dept Mech & Aerosp Engn, Sangareddy 502284, TS, India
来源：
2021 SYMPOSIUM ON DESIGN, TEST, INTEGRATION & PACKAGING OF MEMS AND MOEMS | 2021年
关键词：
MEMS; cantilever; perforations; PULL-IN VOLTAGE;
D O I：
10.1109/DTIP54218.2021.9568667
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In this paper, the circular, square and hexagonal perforations of size 2.5 mu m-14.5 mu m are considered and compared with a simple rectangular beam. Structural and coupled structural-electrostatic analyses are performed using COMSOL Metaphysics to obtain the results. As the perforation size increases, both resonance frequency and static deflection of the beam increase and the pull-in voltage decrease. Among all the proposed designs, design with hexagonal perforation has the highest resonance frequency of 34.5 kHz. Static deflection is found to be greater in beams with circular perforations. Beam with square perforations has the lowest pull-in voltage of 3.84 V.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] New Analytical Model of Switching Capacitance for MEMS Shunt Perforated Switch
    Guha, Koushik
    Baishya, Srimanta
    Borah, Ananta Kumar
    2017 IEEE 12TH NANOTECHNOLOGY MATERIALS AND DEVICES CONFERENCE (NMDC), 2017, : 107 - 108
  • [32] Design, Simulation and Analysis of Perforated RF MEMS Capacitive Shunt Switch
    Karumuri S.R.
    Chand C.G.
    Guha K.
    Maity N.P.
    Maity R.
    Maity S.
    Prathyusha D.
    Kondavitee G.S.
    Micro and Nanosystems, 2021, 13 (04) : 448 - 457
  • [33] Evaluation of Squeeze-film Damping Effects in MEMS Perforated Plates
    Nigro, Salvatore
    Pagnotta, Leonardo
    Pantano, Maria F.
    NEW ASPECTS OF FLUID MECHANICS, HEAT TRANSFER AND ENVIRONMENT, 2010, : 314 - +
  • [34] Design of Perforated Membrane for Low-Noise Capacitive MEMS Accelerometers
    Isobe, Atsushi
    Kamada, Yudai
    Takubo, Chisaki
    Furubayashi, Yuki
    Oshima, Takashi
    Sakuma, Noriyuki
    Sekiguchi, Tomonori
    IEEE SENSORS JOURNAL, 2020, 20 (03) : 1184 - 1190
  • [35] Polymeric 3D Printed Functional Microcantilevers for Biosensing Applications
    Stassi, Stefano
    Fantino, Erika
    Calmo, Roberta
    Chiappone, Annalisa
    Gillono, Matteo
    Scaiola, Davide
    Pirri, Candido Fabrizio
    Ricciardi, Carlo
    Chiado, Alessandro
    Roppolo, Ignazio
    ACS APPLIED MATERIALS & INTERFACES, 2017, 9 (22) : 19193 - 19201
  • [36] Reactive getters for MEMS applications
    Chuntonov, K.
    Setina, J.
    VACUUM, 2016, 123 : 42 - 48
  • [37] MEMS Mirrors for automotive applications
    Tsuchiya, Toshiyuki
    2017 IEEE INTERNATIONAL MEETING FOR FUTURE OF ELECTRON DEVICES, KANSAI (IMFEDK), 2017, : 82 - 83
  • [38] MEMS for medical technology applications
    Frisk, Thomas
    Roxhed, Niclas
    Stemme, Goeran
    MICROFLUIDICS, BIOMEMS, AND MEDICAL MICROSYSTEMS V, 2007, 6465
  • [39] MEMS applications in space exploration
    Tang, WC
    MICROMACHINED DEVICES AND COMPONENTS III, 1997, 3224 : 202 - 211
  • [40] MEMS Inertial Sensors and Their Applications
    Maenaka, Kazusuke
    INSS 2008: PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON NETWORKED SENSING SYSTEMS, 2008, : 71 - 73
12345