On time-of-flight ion energy deposition into a metal target by high-intensity pulsed ion beam generated in bipolar-pulse mode

被引:7
作者
Xin, J. P. [1 ]
Zhu, X. P. [1 ]
Lei, M. K. [1 ]
机构
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Surface Engn Lab, Dalian 116024, Peoples R China
基金
中国国家自然科学基金;
关键词
High-intensity pulsed ion beam; Irradiation; Energy deposition; Time-of-flight effect; Subsurface heating; SURFACE; TITANIUM;
D O I
10.1016/j.surfcoat.2011.04.052
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The energy deposition of high-intensity pulsed ion beam (HIPIB) into a titanium target was studied in TEMP-6 apparatus of bipolar-pulse mode using a self-magnetic field magnetically insulated ion diode (MID), where anode plasma was pre-generated by a first negative voltage and then mixed carbon ions and proton beam was extracted during the positive stage of the bipolar pulse. According with the time-of-flight (TOF) of ions. C+ arriving at the target 14 cm downstream from the MID was delayed by 55 ns relative to H+ at a peak accelerating voltage of 250 kV and the ion energy spectrum varied greatly, starting with a Gaussian profile at exit of MID and arriving with a multi-energy complex distribution. The TOF ion energy deposition of HIPIB showed that the energy deposition proceeded firstly in a deeper depth delivered by H+ and then moved towards a top layer dominated by C+. It is found that, the contribution of H+ to the energy deposition is negligible at the beam composition of 70%C+ and 30%H+. As a result, the gradient of energy deposition profile in target is negative by C+ deposition through the whole pulse. This unique feature of HIPIB energy deposition can lead to different thermal and dynamic effects as compared to previous studies of H+-abundant HIPIB, electron or laser beam, especially limiting subsurface heating that is concerned as a major cause of droplet ejection and surface cratering and waviness formation. (C) 2011 Elsevier B.V. All rights reserved.
引用
收藏
页码:879 / 883
页数:5
相关论文
共 16 条
  • [1] Surface treatment of steel by short pulsed injection of high-power ion beam
    Akamatsu, H
    Ikeda, T
    Azuma, K
    Fujiwara, E
    Yatsuzuka, M
    [J]. SURFACE & COATINGS TECHNOLOGY, 2001, 136 (1-3) : 269 - 272
  • [2] Laser-induced explosive boiling during nanosecond laser ablation of silicon
    Craciun, V
    Bassim, N
    Singh, RK
    Craciun, D
    Hermann, J
    Boulmer-Leborgne, C
    [J]. APPLIED SURFACE SCIENCE, 2002, 186 (1-4) : 288 - 292
  • [3] Droplets from the metal surfaces irradiated by a high-intensity pulsed ion beam
    Dong, Z. H.
    Zhang, Z.
    Liu, C.
    Zhu, X. P.
    Lei, M. K.
    [J]. APPLIED SURFACE SCIENCE, 2006, 253 (05) : 2557 - 2564
  • [4] Modification of titanium by high power electron beams
    Lavrentiev, V
    Hammerl, C
    Renner, B
    Zeitler, M
    Rauschenbach, B
    Gaponenko, N
    Lonin, Y
    Pisanenko, A
    [J]. SURFACE & COATINGS TECHNOLOGY, 1999, 114 (2-3) : 143 - 147
  • [5] Computer simulation of thermal-mechanical effects of high intensity pulsed ion beams on a metal surface
    Le, XY
    Yan, S
    Zhao, WJ
    Han, BX
    Wang, YG
    Xue, JM
    [J]. SURFACE & COATINGS TECHNOLOGY, 2000, 128 : 381 - 386
  • [6] High heat flux testing of plasma facing materials and components -: Status and perspectives for ITER related activities
    Linke, J.
    Escourbiac, F.
    Mazul, I. V.
    Nygren, R.
    Roedig, M.
    Schlosser, J.
    Suzuki, S.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2007, 367 (SPEC. ISS.) : 1422 - 1431
  • [7] CRITICAL-ASSESSMENT OF THERMAL MODELS FOR LASER SPUTTERING AT HIGH FLUENCES
    MIOTELLO, A
    KELLY, R
    [J]. APPLIED PHYSICS LETTERS, 1995, 67 (24) : 3535 - 3537
  • [8] Materials processing with intense pulsed ion beams
    Rej, DJ
    Davis, HA
    Olson, JC
    Remnev, GE
    Zakoutaev, AN
    Ryzhkov, VA
    Struts, VK
    Isakov, IF
    Shulov, VA
    Nochevnaya, NA
    Stinnett, RW
    Neau, EL
    Yatsui, K
    Jiang, W
    [J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1997, 15 (03): : 1089 - 1097
  • [9] High intensity pulsed ion beam sources and their industrial applications
    Remnev, GE
    Isakov, IF
    Opekounov, MS
    Matvienko, VM
    Ryzhkov, VA
    Struts, VK
    Grushin, II
    Zakoutayev, AN
    Potyomkin, AV
    Tarbokov, VA
    Pushkaryov, AN
    Kutuzov, VL
    Ovsyannikov, MY
    [J]. SURFACE & COATINGS TECHNOLOGY, 1999, 114 (2-3) : 206 - 212
  • [10] Laser inertial fusion dry-wall materials response to pulsed ions at power-plant level fluences
    Renk, TJ
    Tanaka, TJ
    Olson, CL
    Peterson, RR
    Knowles, TR
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2004, 329 : 726 - 731