Thermal analysis in Ti-6Al-4V drilling

被引：26

作者：

Lazoglu, Ismail ^{[1
]}

Poulachon, Gerard ^{[2
]}

Ramirez, Christophe ^{[2
]}

Akmal, Mohammad ^{[1
]}

Marcon, Bertrand ^{[2
]}

Rossi, Frederic ^{[2
]}

Outeiro, Jose C. ^{[2
]}

Krebs, Michael ^{[2
]}

机构：

[1] Koc Univ, Mfg & Automat Res Ctr, Istanbul, Turkey

[2] Arts & Metiers ParisTech, LaBoMaP, Cluny, France

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2017年 / 66卷 / 01期

关键词：

Drilling; Temperature; Titanium; CUTTING EDGE; TEMPERATURE; TOOL;

D O I：

10.1016/j.cirp.2017.04.020

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Ti-6Al-4V is commonly used especially in aerospace and biomedical industries. This alloy is known as a difficult-to-cut material. Due to its poor thermal properties, the heat generated during machining processes traps near material deformation zones. This causes detrimental high temperatures for the cutting tools. This article combines the analytical and FEM modeling techniques to estimate the temperature evolution of carbide tools in Ti-6Al-4V drilling. In this article, a novel thermocouple based temperature measurement setup is also introduced. Moreover, the simulated and measured temperatures under various cutting conditions for the drilling of Ti-6Al-4V are presented for the validation. (C) 2017 Published by Elsevier Ltd on behalf of CIRP.

引用

页码：105 / 108

页数：4

共 50 条

[41] INFLUENCE OF PROCESS PARAMETERS IN FRICTION DRILLING OF TITANIUM TI-6AL-4V ALLOY
Pangjundee, Thongchai
Muttamara, Apiwat
MM SCIENCE JOURNAL, 2021, 2021 : 4791 - 4796
[42] Cryogenic Drilling of Ti-6Al-4V Alloy Under Liquid Nitrogen Cooling
Ahmed, L. Shakeel
Kumar, M. Pradeep
MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (07) : 951 - 959
[43] Optimisation and tool life study in drilling of titanium (Ti-6Al-4V) alloy
Prabukarthi, A. (prabukarthi.arumugam@gmail.com), 1600, Inderscience Enterprises Ltd., 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (13): : 2 - 3
[44] Optimization of Micro-EDM drilling parameters of Ti-6Al-4V alloy
Dewangan, Shailesh
Kumar, S. Deepak
Jha, Sanjay Kumar
Biswas, Chandan Kumar
MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 5481 - 5485
[45] Modelling of cutting forces in orbital drilling of titanium alloy Ti-6Al-4V
Rey, P. A.
LeDref, J.
Senatore, J.
Landon, Y.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016, 106 : 75 - 88
[46] A study on strengthening and machining integrated ultrasonic peening drilling of Ti-6Al-4V
Liu, Yihang
Geng, Daxi
Shao, Zhenyu
Zhou, Zehua
Jiang, Xinggang
Zhang, Deyuan
MATERIALS & DESIGN, 2021, 212
[47] Micro-drilling of Ti-6Al-4V alloy: The effects of cooling/lubricating
Percin, M.
Aslantas, K.
Ucun, I.
Kaynak, Y.
Cicek, A.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2016, 45 : 450 - 462
[48] Microplasticity in HCF of Ti-6Al-4V
Morrissey, RJ
McDowell, DL
Nicholas, T
INTERNATIONAL JOURNAL OF FATIGUE, 2001, 23 : S55 - S64
[49] INTERFACE PHASE IN TI-6AL-4V
HALL, IW
SCANDINAVIAN JOURNAL OF METALLURGY, 1979, 8 (01) : 17 - 20
[50] IMPROVED TOUGHNESS IN TI-6AL-4V
EARLY, PW
BURNS, SJ
JOM-JOURNAL OF METALS, 1976, 28 (12): : A37 - A37

← 1 2 3 4 5 →