Thermal analysis in Ti-6Al-4V drilling

被引：26

作者：

Lazoglu, Ismail ^{[1
]}

Poulachon, Gerard ^{[2
]}

Ramirez, Christophe ^{[2
]}

Akmal, Mohammad ^{[1
]}

Marcon, Bertrand ^{[2
]}

Rossi, Frederic ^{[2
]}

Outeiro, Jose C. ^{[2
]}

Krebs, Michael ^{[2
]}

机构：

[1] Koc Univ, Mfg & Automat Res Ctr, Istanbul, Turkey

[2] Arts & Metiers ParisTech, LaBoMaP, Cluny, France

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2017年 / 66卷 / 01期

关键词：

Drilling; Temperature; Titanium; CUTTING EDGE; TEMPERATURE; TOOL;

D O I：

10.1016/j.cirp.2017.04.020

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Ti-6Al-4V is commonly used especially in aerospace and biomedical industries. This alloy is known as a difficult-to-cut material. Due to its poor thermal properties, the heat generated during machining processes traps near material deformation zones. This causes detrimental high temperatures for the cutting tools. This article combines the analytical and FEM modeling techniques to estimate the temperature evolution of carbide tools in Ti-6Al-4V drilling. In this article, a novel thermocouple based temperature measurement setup is also introduced. Moreover, the simulated and measured temperatures under various cutting conditions for the drilling of Ti-6Al-4V are presented for the validation. (C) 2017 Published by Elsevier Ltd on behalf of CIRP.

引用

页码：105 / 108

页数：4

共 50 条

[11] Numerical Investigation on Thermal Performance of Duplex Nanocoolant Jets in Drilling of Ti-6Al-4V Alloy
Mohan, R.
Shrikhande, Shardul
Joshi, Vedant
Harish, R.
APPLIED SCIENCES-BASEL, 2022, 12 (22):
[12] Analysis of Burr Height in Ultrasonic-Assisted Drilling of Ti-6Al-4V Alloy
Hsu, I-Chien
Tsao, Chung-Chen
JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2013, 34 (01): : 31 - 38
[13] Experimental analysis of Ti-6Al-4V drilling: tool wear monitoring and parametric characterisation
Hashmi, Khalid Hussain
Khalil, Muhammad Shahid
International Journal of Machining and Machinability of Materials, 2024, 25 (3-4) : 354 - 374
[14] Analysis of burr height in ultrasonic-assisted drilling of Ti-6Al-4V alloy
Tsao, C.-C., 1600, Chinese Mechanical Engineering Society (34):
[15] 3D Finite Element Analysis of Drilling of Ti-6Al-4V Alloy
Su, Y.
Chen, D. D.
Gong, L.
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON COMPUTER INFORMATION SYSTEMS AND INDUSTRIAL APPLICATIONS (CISIA 2015), 2015, 18 : 907 - 911
[16] Experimental investigation and analysis of drilling in Grade 5 Titanium alloy (Ti-6Al-4V)
Joy, Nivin
Prakash, S.
Krishnamoorthy, A.
Antony, Alphonsa
MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 335 - 339
[17] PERFORMANCE EVALUATION OF SUPERHARD COATINGS IN DRILLING OF TI-6AL-4V ALLOY
Dinh Nguyen
Kwon, Patrick
Voznyuk, Vadim
Kim, Dave
PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 4, 2017,
[18] EXPERIMENTAL INVESTIGATION ON ELECTRICAL DISCHARGE DRILLING OF Ti-6Al-4V ALLOY
Yadav, Umacharan Singh
Yadava, Vinod
MACHINING SCIENCE AND TECHNOLOGY, 2015, 19 (04) : 515 - 535
[19] Experimental study of graphene oxide suspension in drilling Ti-6Al-4V
Yi, Shuang
Li, Guangxian
Ding, Songlin
Mo, John
Rahman, M.
PROCEEDINGS OF THE 2ND INFORMATION TECHNOLOGY AND MECHATRONICS ENGINEERING CONFERENCE (ITOEC 2016), 2016, 24 : 208 - 211
[20] Transformation superplasticity of Ti-6Al-4V and Ti-6Al-4V/TiC composites at high stresses
Schuh, C
Dunand, DC
SUPERPLASTICITY IN ADVANCED MATERIALS, ICSAM-2000, 2001, 357-3 : 177 - 182

← 1 2 3 4 5 →