Thermal analysis in Ti-6Al-4V drilling

被引：26

作者：

Lazoglu, Ismail ^{[1
]}

Poulachon, Gerard ^{[2
]}

Ramirez, Christophe ^{[2
]}

Akmal, Mohammad ^{[1
]}

Marcon, Bertrand ^{[2
]}

Rossi, Frederic ^{[2
]}

Outeiro, Jose C. ^{[2
]}

Krebs, Michael ^{[2
]}

机构：

[1] Koc Univ, Mfg & Automat Res Ctr, Istanbul, Turkey

[2] Arts & Metiers ParisTech, LaBoMaP, Cluny, France

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2017年 / 66卷 / 01期

关键词：

Drilling; Temperature; Titanium; CUTTING EDGE; TEMPERATURE; TOOL;

D O I：

10.1016/j.cirp.2017.04.020

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Ti-6Al-4V is commonly used especially in aerospace and biomedical industries. This alloy is known as a difficult-to-cut material. Due to its poor thermal properties, the heat generated during machining processes traps near material deformation zones. This causes detrimental high temperatures for the cutting tools. This article combines the analytical and FEM modeling techniques to estimate the temperature evolution of carbide tools in Ti-6Al-4V drilling. In this article, a novel thermocouple based temperature measurement setup is also introduced. Moreover, the simulated and measured temperatures under various cutting conditions for the drilling of Ti-6Al-4V are presented for the validation. (C) 2017 Published by Elsevier Ltd on behalf of CIRP.

引用

页码：105 / 108

页数：4

共 50 条

[1] Thermal modeling of drilling process in titanium alloy (Ti-6Al-4V)
Kumar, Ankit
Bhardwaj, Rajneesh
Joshi, Suhas S.
MACHINING SCIENCE AND TECHNOLOGY, 2020, 24 (03) : 341 - 365
[2] Thermal analysis of micro milling titanium alloy Ti-6Al-4V
Mamedov, Ali
Lazoglu, Ismail
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 229 : 659 - 667
[3] Drilling of CFRP/Ti-6Al-4V Stacks
Tashiro, Tetsuya
Fujiwara, Junsuke
Inada, Keiko
ADVANCES IN ABRASIVE TECHNOLOGY XIV, 2011, 325 : 369 - +
[4] Drilling burr formation in titanium alloy, Ti-6Al-4V
Dornfeld, DA
Kim, JS
Dechow, H
Hewson, J
Chen, LJ
CIRP ANNALS 1999 - MANUFACTURING TECHNOLOGY, 1999, : 73 - 76
[5] Cryogenic Drilling of Ti-6Al-4V Alloy Under Liquid Nitrogen Cooling
Ahmed, L. Shakeel
Kumar, M. Pradeep
MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (07) : 951 - 959
[6] Experimental investigation and analysis of drilling in Grade 5 Titanium alloy (Ti-6Al-4V)
Joy, Nivin
Prakash, S.
Krishnamoorthy, A.
Antony, Alphonsa
MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 335 - 339
[7] Multiresponse optimization of cryogenic drilling on Ti-6Al-4V alloy using topsis method
L. Shakeel Ahmed
M. Pradeep Kumar
Journal of Mechanical Science and Technology, 2016, 30 : 1835 - 1841
[8] Multiresponse optimization of cryogenic drilling on Ti-6Al-4V alloy using topsis method
Ahmed, L. Shakeel
Kumar, M. Pradeep
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2016, 30 (04) : 1835 - 1841
[9] Warm Spray Forming of Ti-6Al-4V
Molak, R. M.
Araki, H.
Watanabe, M.
Katanoda, H.
Ohno, N.
Kuroda, S.
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2014, 23 (1-2) : 197 - 212
[10] Effect of texture on load partitioning in Ti-6Al-4V
Warwick, J. L. W.
Coakley, J.
Raghunathan, S. L.
Tailing, R. J.
Dye, D.
ACTA MATERIALIA, 2012, 60 (10) : 4117 - 4127

← 1 2 3 4 5 →