Design and fabrication of 3D-printed planar Fresnel zone plate lens

被引：38

作者：

Zhang, S. ^{[1
]}

机构：

[1] Univ Loughborough, Wolfson Sch Mech Elect & Mfg Engn, Loughborough LE11 3TU, Leics, England

来源：

ELECTRONICS LETTERS | 2016年 / 52卷 / 10期

基金：

英国工程与自然科学研究理事会;

关键词：

three-dimensional printing; zone plates; lenses; permittivity; planar Fresnel zone plate lens; 3D-printing; dielectric Fresnel zone plate lens; dielectric zones; permittivities; gain enhancement; frequency 8 GHz to 12 GHz;

D O I：

10.1049/el.2016.0736

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

3D-printing has been used for rapidly prototyping a low-cost and light-weight dielectric Fresnel zone plate lens. This lens was comprised of four dielectric zones and they were fabricated in one process with the tailored permittivities. Measurements show that this lens provides 7.3-12.8 dB gain enhancement over the frequency band from 8 to 12 GHz.

引用

页码：833 / U65

页数：3

共 50 条

[21] Design, fabrication, and characterization of 3D-printed ABS and PLA scaffolds potentially for tissue engineering
Rahatuzzaman, Md
Mahmud, Minar
Rahman, Sazedur
Hoque, Md Enamul
RESULTS IN ENGINEERING, 2024, 21 (21)
[22] Design of a new 3D-printed joint plug
Tayebi, Lobat
Cui, Zhanfeng
Ye, Hua
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, 2019, 14 (06)
[23] 3D-Printed Dual Band Planar Inverted F Antenna
Harle, Lee
Oakley, Christopher
Papapolymerou, John
2016 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM, 2016, : 817 - 818
[24] Design and Characterization of Non-planar 3D-printed Passive UHF-RFID Tag
Vidal, N.
Salas-Barenys, A.
Garcia, A.
Romeu, J.
Gonzalez, G.
Jofre, L. L.
Lopez-Villegas, J. M.
2020 XXXV CONFERENCE ON DESIGN OF CIRCUITS AND INTEGRATED SYSTEMS (DCIS), 2020,
[25] Fabrication and optimisation of a fused filament 3D-printed microfluidic platform
Tothill, A. M.
Partridge, M.
James, S. W.
Tatam, R. P.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2017, 27 (03)
[26] 3D-Printed MOF Monoliths: Fabrication Strategies and Environmental Applications
Molavi, Hossein
Mirzaei, Kamyar
Barjasteh, Mahdi
Rahnamaee, Seyed Yahya
Saeedi, Somayeh
Hassanpouryouzband, Aliakbar
Rezakazemi, Mashallah
NANO-MICRO LETTERS, 2024, 16 (01)
[27] Fabrication of a Microfluidic Cell Compressor Using a 3D-Printed Mold
Emeigh, Carson
Zhang, Haipeng
Ryu, Sangjin
PROCEEDINGS OF ASME 2022 FLUIDS ENGINEERING DIVISION SUMMER MEETING, FEDSM2022, VOL 2, 2022,
[28] Fabrication of 3D-printed hygromorphs based on different cellulosic fillers
Matthias Langhansl
Jörg Dörrstein
Peter Hornberger
Cordt Zollfrank
Functional Composite Materials, 2 (1):
[29] Designing 3D-printed concrete structures with scaled fabrication models
Yefan Zhi
Teng Teng
Masoud Akbarzadeh
Architectural Intelligence, 3 (1):
[30] Design and fabrication of 3D-printed in situ crystallization plates for probing microcrystals in an external electric field
Khakurel, Krishna Prasad
Nemergut, Michal
Dzupponova, Veronika
Kropielnicki, Kamil
Savko, Martin
Zoldak, Gabriel
Andreasson, Jakob
JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2024, 57 : 842 - 847

← 1 2 3 4 5 →